HF beta 1.0.6

Locked
Taguilo
Posts: 658
Joined: Sun May 11, 2014 11:49 am
Re: HF2 beta 1.0.6

Post by Taguilo » Sat Feb 01, 2020 10:57 pm

Hi,

Two significant upgrades:

- Flight Hours gauge now records actual flight time triggered by weight on wheels negative (aircraft off ground). It will persist between sessions.

- Yoke clocks now include timer countdown mode & test mode. Performance similar to Davtron MB801 model

Other improvements include:
- Better representation of erratic Magnetic Compass due to external affecting factors.
- More accurate Battery amperage drawn when aircraft operated with Triple Fed Bud only enabled.

Tomas

chevelle505
Posts: 57
Joined: Fri Jan 17, 2020 3:33 am
Re: HF2 beta 1.0.6

Post by chevelle505 » Sun Feb 02, 2020 12:16 am

@chevelle,

Can you try to create a new saved flight from scratch and see if your GEN issue is fixed? I have tried to replicate your issue tens of times and I have had not one issue with the gens not coming online
Thanks for the help raptor, yeah, ive tried that as well, same issue. i just cant figure out what im doing wrong. First off, like i said the MVAMS current state option seems to be broken..as no matter what state i leave the airplane in she starts up with engines off (big problem when continuing a flight :? ) and avionics off, master on and all panel lights on max....so... I shut everything to off for a cold and dark panel. Master on, request ground power...when available i flip the ground power switch on the panel to on and ive got good power on gpu. I can turn on avionics etc and program fms. THEN, when we're ready to go (engines running), i flip ground power switch to off, disconnect gpu and give it a sec to shut down. Then i go to close the gens by going to on, then up to reset for a second and this is where its flashing power on for a sec..then it trips and i have no gen. I can repeatedly try to reset the gen only to have power for a second then nothing. Both engines, doesnt matter what i do. If i close the "gen tie man close" then i have power..but both gen lights are illuminated. The second i try to reset a gen it trips and no power. I have to restart the sim to get them back. Now, even if i restart the sim and open the same saved flight (usually sitting on the ramp from the last time i flew) if i dont mess with ground power..all works as normal.
NOW, i did finally get it to work..did the same as above and the left gen closed as normal..however..for some reason ive got another bug...with the new HF...ill start the right engine, all goes well, go to start the left engine and when i move the condition lever to idle nothing happens. Try using the ctrl shift f4 and still nothing.
Restart the sim and same old song and dance. Either no gens or i cant get number 1 to light off with the condition lever. Still very buggy as far as using the gens and condition levers.

On a side note, is there any progress or hope for fixing the ability to resume a flight with the condition you left everything in from the last flight.. obviously down the road..just wondering if this is on the list?

Also wanted to say, good job milviz..for what its worth, i know all this "bug reporting" may sound like complaints over this and that. Just wanted to reiterate, you guys have done an absolutley phenomenal job, hands down the best king air sim to date. Just looking forward to getting everything squared away over time.

real
Posts: 55
Joined: Tue Aug 17, 2010 4:37 pm
Re: HF2 beta 1.0.6

Post by real » Sun Feb 02, 2020 1:13 am

Hi,

Do i uninstall previous version first?

Thanks

Real

B747F
Posts: 54
Joined: Mon Jul 29, 2013 2:33 am
Re: HF2 beta 1.0.6

Post by B747F » Sun Feb 02, 2020 2:49 am

Thank you for making the beta public. Climbing flight change with terrain radar set and caution terrain sound started and will not stop unless the terrain radar is not activated. Turning on terrain radar and caution terrain sound plays over and over! I passed the terrain obstacle 10k ft ago!

Rossco
Posts: 32
Joined: Sat Sep 20, 2014 2:25 am
Location: Australia
Re: HF2 beta 1.0.6

Post by Rossco » Sun Feb 02, 2020 4:38 am

I can get the calibration to appear to work however it never saves what I have done & also does not show/see my condition 2 lever axis which Win10 calls "dial". I have a PFC Throttle Quad.

Edit. Well after playing around with it for a while it looks like it does save however doesn't show that it has been & doesn't indicate what axis you have assigned to what control when you re enter the app.

matpietsch
Posts: 268
Joined: Sat Dec 21, 2019 10:02 pm
Re: HF2 beta 1.0.6

Post by matpietsch » Sun Feb 02, 2020 7:58 am

B747F wrote:
Sun Feb 02, 2020 2:49 am
Thank you for making the beta public. Climbing flight change with terrain radar set and caution terrain sound started and will not stop unless the terrain radar is not activated. Turning on terrain radar and caution terrain sound plays over and over! I passed the terrain obstacle 10k ft ago!
Have you pressed the silencing button?

FinnJacobsen
Posts: 87
Joined: Tue Apr 17, 2018 1:03 pm
Re: HF2 beta 1.0.6

Post by FinnJacobsen » Sun Feb 02, 2020 9:27 am

B747F wrote:
Sun Feb 02, 2020 2:49 am
Thank you for making the beta public. Climbing flight change with terrain radar set and caution terrain sound started and will not stop unless the terrain radar is not activated. Turning on terrain radar and caution terrain sound plays over and over! I passed the terrain obstacle 10k ft ago!
I had this flying 3000 ft over the flat terrain of Denmark.
It can be silenced by pressing the Terrain Inhibit buton, but it really shouldn´t trigger under those circumstances.

gertbarring
Posts: 4
Joined: Sat Dec 21, 2019 9:30 pm
Re: HF2 beta 1.0.6

Post by gertbarring » Sun Feb 02, 2020 10:40 am

I have the same problems with terrain warning. In addition to having problems with he waypoint data on the mid MFD, showing wrong distance remaining (as pictured).
Attachments
Capture.PNG
Capture.PNG (67.43 KiB) Viewed 3201 times

matpietsch
Posts: 268
Joined: Sat Dec 21, 2019 10:02 pm
Re: HF2 beta 1.0.6

Post by matpietsch » Sun Feb 02, 2020 11:11 am

What’s wrong there? Cannot see anything wrong with it.

gertbarring
Posts: 4
Joined: Sat Dec 21, 2019 9:30 pm
Re: HF2 beta 1.0.6

Post by gertbarring » Sun Feb 02, 2020 11:19 am

Apparently I'm going to be at my destination (ENVA) prior to EPALU.

matpietsch
Posts: 268
Joined: Sat Dec 21, 2019 10:02 pm
Re: HF2 beta 1.0.6

Post by matpietsch » Sun Feb 02, 2020 11:34 am

Oh yeah. I was looking at the distances only. But the time do no add up. Could it be that you had to fly somewhat over the airport and that this did threw the FMS off?

gertbarring
Posts: 4
Joined: Sat Dec 21, 2019 9:30 pm
Re: HF2 beta 1.0.6

Post by gertbarring » Sun Feb 02, 2020 12:05 pm

Below you can see the STAR (NELSU2M arr). The yellow circle is the airport (ENVA). Also the distance kept changing throughout the flight (adding and subtracting NM for no apparent reason). Another problem I have experienced on my two test flights, is that the AP is capturing the GS on the ILS, but instead of following it, it levels off. On one of the flights I was able to recapture it again with the autopilot, but on the second flight I had to revert to manual flight.
Attachments
Skjermbilde.PNG
Skjermbilde.PNG (312.26 KiB) Viewed 3187 times

FinnJacobsen
Posts: 87
Joined: Tue Apr 17, 2018 1:03 pm
Re: HF2 beta 1.0.6

Post by FinnJacobsen » Sun Feb 02, 2020 12:23 pm

Regarding Glide slope following..
Flying at a reasonable speed is important for the Autopilot to follow the glide slope.
If Your too fast it will make it very reluctasnt to descend. Also flying too slow will make it descend below the glide slope.
With landing gera nd flaps down, I find that 105-115 kts works fine (probably depending on GW).

chevelle505
Posts: 57
Joined: Fri Jan 17, 2020 3:33 am
Re: HF2 beta 1.0.6

Post by chevelle505 » Sun Feb 02, 2020 12:43 pm

Another problem I have experienced on my two test flights, is that the AP is capturing the GS on the ILS, but instead of following it, it levels off

I have had this problem as well and i shoot for 110kts deoending on weight..still seemed to do its own thing.

ificratis
Posts: 80
Joined: Sat Oct 07, 2017 5:21 pm
Re: HF2 beta 1.0.6

Post by ificratis » Sun Feb 02, 2020 3:46 pm

Does for you guys the new axis assignment through MVAMS works?

I assign all levers through MVAMS and hit Save and Save Defaults, but when I load the plane, nothing moves.


Locked

Return to “K.A.350 Support Forum”