KA350i [Resolved]
-
Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: KA350i
A new release version was sent out, check your email or Orbx if you've purchased through them. Also a link here in support.
-
xxd09
- Posts: 129
- Joined: Mon May 25, 2015 1:36 pm
Re: KA350i
Thanks for keeping me in the loop
Tried this v 1.2.0.20201109
No joy
Loads and freezes.Black boxes as pop ups
xxd09
PS Allowed the full sim to load before selecting the KingAir
It fired up fully for 3 seconds then froze
It seems a minor glitch is in my system but finding it ?
Tried this v 1.2.0.20201109
No joy
Loads and freezes.Black boxes as pop ups
xxd09
PS Allowed the full sim to load before selecting the KingAir
It fired up fully for 3 seconds then froze
It seems a minor glitch is in my system but finding it ?
-
Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: KA350i
Try reinstalling the P3D client and content. It won't hurt your install at all and its easy. Also are you by chance using Nvidia inspector or any other external software?
-
xxd09
- Posts: 129
- Joined: Mon May 25, 2015 1:36 pm
Re: KA350i
Running out of puff Steve!
I will try again when I go to v5.1
Waiting at the moment for updates for WX Radar etc
No other Milviz planes flying so not so much pressure on me
Will keep you in touch
Thanks for your help
xxd09
The weather radar is working with 5.1 AFAIK
I will try again when I go to v5.1
Waiting at the moment for updates for WX Radar etc
No other Milviz planes flying so not so much pressure on me
Will keep you in touch
Thanks for your help
xxd09
The weather radar is working with 5.1 AFAIK
-
xxd09
- Posts: 129
- Joined: Mon May 25, 2015 1:36 pm
Re: KA350i
No Nvidia Inspector in use or other external software
I note that Flight1 GTN has not been updated to V5.1
I am ina holding pattern at the moment!
xxd09
I note that Flight1 GTN has not been updated to V5.1
I am ina holding pattern at the moment!
xxd09
-
Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
-
xxd09
- Posts: 129
- Joined: Mon May 25, 2015 1:36 pm
Re: KA350i
Keeping you in touch!
Got in the air with a plane -11000 feet-then selected the KingAir and everything came to life and I can fly her,land her and take off!
All systems go
However selecting the KingAir for take off as an initial selection is a no go-full on closedown with chocks etc
A voice tells me that Autostart is not available
So halfway there and can use the beast albeit in an awkward manner
Interestingly she uses 4.9 gb of 10 gb GPU memory -very demanding!
Onwards and upwards
xxd09
PS one interesting anomaly-windscreen wipers on all the time and knob to switch them off won’t stay off
Got in the air with a plane -11000 feet-then selected the KingAir and everything came to life and I can fly her,land her and take off!
All systems go
However selecting the KingAir for take off as an initial selection is a no go-full on closedown with chocks etc
A voice tells me that Autostart is not available
So halfway there and can use the beast albeit in an awkward manner
Interestingly she uses 4.9 gb of 10 gb GPU memory -very demanding!
Onwards and upwards
xxd09
PS one interesting anomaly-windscreen wipers on all the time and knob to switch them off won’t stay off
-
Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: KA350i
Strange. It seems to be something related to your particular setup. Are you running the MVAMS as an admin? Try setting the plane to current conditions or toggling to a different state, save, then select current conditions and save again.
-
xxd09
- Posts: 129
- Joined: Mon May 25, 2015 1:36 pm
Re: KA350i
I experimented with MAMS
Ready to Start nearly worked but setting Options to Current Conditions did the trick
This is a new one on me-more reading of manual required
Can now take off after selecting from drop down menu
Only item left are Windscreen Wipers permanently on and turning Wiper knob does not seem to work-knob will turn and put wipers off but reverts immediately to on again
Nearly there!
xxd09
PS started again .Windscreen Wipers in Park mode
I think I am there!!!!!
Thanks for your help and persistence
Ready to Start nearly worked but setting Options to Current Conditions did the trick
This is a new one on me-more reading of manual required
Can now take off after selecting from drop down menu
Only item left are Windscreen Wipers permanently on and turning Wiper knob does not seem to work-knob will turn and put wipers off but reverts immediately to on again
Nearly there!
xxd09
PS started again .Windscreen Wipers in Park mode
I think I am there!!!!!
Thanks for your help and persistence
-
Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: KA350i
No problem. Glad to hear you are sorted.
Another tip since you are new to this aircraft is setup your flight beforehand in the start of the selection screen of P3D. No need to load another aircraft. Changing locations/accelerating time within the sim after you have setup the aircraft can cause issues.
Current conditions will pretty much leave the aircraft in the state you last left it minus the flight plan. It's always a good idea to start MVAMS before starting the sim and setting up the aircraft to check condition of your engines too.
Another tip since you are new to this aircraft is setup your flight beforehand in the start of the selection screen of P3D. No need to load another aircraft. Changing locations/accelerating time within the sim after you have setup the aircraft can cause issues.
Current conditions will pretty much leave the aircraft in the state you last left it minus the flight plan. It's always a good idea to start MVAMS before starting the sim and setting up the aircraft to check condition of your engines too.