Assign switches

cuevision
Posts: 10
Joined: Tue Jun 21, 2016 3:32 pm
Assign switches

Post by cuevision » Tue Jun 21, 2016 7:23 pm

Hello to you all

I have just bought two days ago the Bell 407. I have tried to assign buttons from the cockpit to my joystci. I have tried it via the P3D controles and via FSUIPC. Did not succeed yet. Can anyone tell me how this can be fixed please?

Thanks and regards,
Ed

cuevision
Posts: 10
Joined: Tue Jun 21, 2016 3:32 pm
Re: Assign switches

Post by cuevision » Wed Jun 22, 2016 5:46 am

Hello

Any support?

Regards,
Ed

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Assign switches

Post by JonathanBleeker » Wed Jun 22, 2016 8:09 am

Let me check if Ville (wiltzei) still has macros for the 407.....

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Assign switches

Post by Krazycolin » Wed Jun 22, 2016 11:27 am

Sorry to say but this isn't a support question. For this type of issue, you'll have to wait till someone who does this type of thing in their aircraft assists you

If the product doesn't work for some reason with the standard and expected methods, that would be a support question and we would work to resolve it. However, this is not the case here.

I suggest doing a search for macros and 407 here and through Google.

Thanks for your attention

cuevision
Posts: 10
Joined: Tue Jun 21, 2016 3:32 pm
Re: Assign switches

Post by cuevision » Wed Jun 22, 2016 6:06 pm

?

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Assign switches

Post by Krazycolin » Wed Jun 22, 2016 7:21 pm

If the product works without assigning the switches to your controllers, then we do not have to go further than that and the reason is fairly obvious... with more than 200 different devices on the market it would be impossible for us to do so for all of them.

So... if you ask, someone MAY help you but it's not required.

There are people here who might help you but it will not be considered a support issue. I therefore suggest that you post this in the general forums as well.

wiltzei
Posts: 34
Joined: Fri Mar 18, 2011 8:57 pm
Re: Assign switches

Post by wiltzei » Tue Jun 28, 2016 5:57 pm

Here are the FSUIPC macros

sr.mudry
Posts: 9
Joined: Thu Mar 22, 2018 11:30 pm
Re: Assign switches

Post by sr.mudry » Fri Mar 23, 2018 7:10 pm

couldn't unrar your file using 7zip. Says it isn't an archive.

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Assign switches

Post by JonathanBleeker » Sat Mar 24, 2018 5:35 pm

Unfortunately it seems all old forum attachments got corrupted with our forum host move a while back.

wiltzei
Posts: 34
Joined: Fri Mar 18, 2011 8:57 pm
Re: Assign switches

Post by wiltzei » Sun Mar 25, 2018 8:02 am

The encore of the macros.
Attachments
MV MD530F macros.rar
(408 Bytes) Downloaded 33 times

sr.mudry
Posts: 9
Joined: Thu Mar 22, 2018 11:30 pm
Re: Assign switches

Post by sr.mudry » Sun Mar 25, 2018 3:16 pm

Are all these settings used in the 407?
They aren't mentioned in the startup procedure.

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Assign switches

Post by Krazycolin » Sun Mar 25, 2018 4:14 pm

They’re not all involved in starting up

sr.mudry
Posts: 9
Joined: Thu Mar 22, 2018 11:30 pm
Re: Assign switches

Post by sr.mudry » Sun Mar 25, 2018 4:32 pm

I follow the startup procedure, with AS16 off, and the 407 still doesn't start.
I end up reloading P3D with the 407 is ready mode.

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Assign switches

Post by Krazycolin » Sun Mar 25, 2018 4:54 pm

Are you starting the sim with a saved flight? If so, please make sure that it's not the 407... and that it is an aircraft that has it's engine(s) running.

sr.mudry
Posts: 9
Joined: Thu Mar 22, 2018 11:30 pm
Re: Assign switches

Post by sr.mudry » Sun Mar 25, 2018 6:07 pm

You definitely have problems with your aircraft. I have to start with a different aircraft and not use real weather. This is not professional quality. Can I get a refund?


Locked

Return to “MV 407 Support Forum”