Blackbird Sims / Milviz Forum Archive

WARNING!

USE AT YOUR OWN RISK! THIS MIGHT BORK YOUR SIM, YOUR OS AND OR YOUR LIFE!

MilViz_B737-200C v4.180424.1

https://www.dropbox.com/s/b9j02qxdlr5kg ... 1.zip?dl=0

Please check this in as many platforms your system supports!

CHANGE LOG
04/24/2018
=============
1. Fixed nose wheel steering
2. Added RealLight to P3Dv4 version
3. Added TrueGlass to P3Dv4 version
4. Updated MVAMS to the new system
5. Updated 64bit DLL files for P3Dv4
6. Updated all MV WX Radar for all sim versions

CHANGE LOG
12/18/2017
=============
1. Renamed pane.s77_wx to panel.wx
2. Changed logic to ensure wing tanks set unless center tank has more than unusable fuel
loaded.

CHANGE LOG
12/12/2017
=============
1. Updated Exterior Texture Materials

CHANGE LOG
12/11/2017
=============
1. Revised Exterior Materials
2. Fixed aircraft.cfg for the Canadian North livery panel=s77 entry
3. Corrected Desktop Icon name for Milviz MVAMS

CHANGE LOG
11/24/2017
=============
1. Updated all models
2. Fixed nightlighting mistakes
3. Removed FMS and SP177
4. Streamlined Installer package

CHANGE LOG
02/24/2016
==============
1. Fixed incorrect path for cargo WX exterior model
2. Fixed missing panel.s77_WX, s77fms_WX and s177_WX folders
3. Added missing WX bitmaps

CHANGE LOG
02/16/2016
==============
1. Fixed Fuel Flow Needles for FSX/P3D

CHANGE LOG
01/03/2016
==============
1. Changed Sound Module universal unit
2. Re-compilled Installer for all sim versions
3. Added WX Option to Installer

Does this install, when done to P3Dv4 require 4.2 or can it be done on a 4.1 install?

There appears to be a problem with the ambient sounds played thru MV3DSound.dll.

It's apparent when you switch on the battery. The switch sound is distinct but the ambient sounds of fans, etc play for only about a second then shut off. Same with all other continuous sounds such as the APU which is totally silent. Switch clicks and such work fine.

This is P3Dv4.

Dutch

4.2 only if you want the wx to work.

I'm guessing Bill needs to take another look...

Krazycolin wrote: ↑

Wed Apr 25, 2018 3:37 am

4.2 only if you want the wx to work.

In my 4.1 install, CTD on selecting the 737 in the startup scenario window. Also, CTD when starting in sim with default Baron, then selecting 737.

Count my experience out of any troubleshooting for you guys. I need to get to 4.2 before doing any more with it.

Thanks for all your efforts, will offer better feedback after getting to current version.

Henry, does the 737 CTD when using the non-WX option? It should work without drama.

Im not getting a CTD on 4.2 but the Trueglass isnt working, reallight does work and looks very good

N4GIX wrote: ↑

Wed Apr 25, 2018 4:59 pm

Henry, does the 737 CTD when using the non-WX option? It should work without drama.

I will give that a try before doing the 4.2 upgrade this weekend...will let you know.

A dream comes true... 732 in the air again...many thx for this...

Warning read and ignored...

Testing in v4.2 so far:

- Graphical issues with WX and black square and 3d knobs of underlying gauge confirmed
- Truelight working, Trueglass not working confirmed
- Sound issues confirmed

Cheers
Thorsten

I only recall integrating RealLight. Not TrueGlass.

Wonderful to see this airplane in P3Dv4 back in the sky!

I also can confirm
- the graphical issues with the WX in the VC
- the issues with the sound.

In addition I'm not able to use the space on the pedestal [Vcockpit22]. Maybe an issue with texture $B737_FreeSpace...

Cheers,
Michael

JonathanBleeker wrote: ↑

Fri Apr 27, 2018 11:34 am

I only recall integrating RealLight. Not TrueGlass.

that would explain... but it was listed in the changelog... thats why we keep asking

[...]
CHANGE LOG
04/24/2018
[...]
3. Added TrueGlass to P3Dv4 version
[...]

Cheers
T.

JonathanBleeker wrote: ↑

Fri Apr 27, 2018 11:34 am

I only recall integrating RealLight. Not TrueGlass.

Jon, I added TrueGlass to the project. It is working just fine here. I'll have to investigate further.

Custom sounds has been fixed.
The rogue TCAS poly has been fixed.

I also can confirm
- the graphical issues with the WX in the VC, part of the screen is obscured by a black section.

I do have another more pressing issue though, and I'm sure it must be my own fault somehow, but have no clue how to narrow it down.
No matter what I choose in MVAMS, cold & dark or ready to fly, when the scenario loads, the aircraft engines spool down and quit. Trying to start them again just leads to a lot of button-clicking sounds that loop for a while, until I set starter knob to OFF, at which the button-clicking stops.

Antivirus was off during download and install, UAC off, installed as Admin. I installed the 310Redux the same evening, and it works like a charm.

What I can say is that quite some time back I installed the previous non-v4.x version into my current P3Dv4.2 installation, and while some features did not work completely, the engines had noe issues and it flew well. I did unistall this before installing the new version, but I guess there's a chance that I borked something...

I've tried uninstalling and reinstalling, but no dice. Have also tried "cycling" the options in MVAMS, without success. Any ideas?

endl3ss wrote: ↑

Sat Apr 28, 2018 12:23 am

I also can confirm
- the graphical issues with the WX in the VC, part of the screen is obscured by a black section.

I've tried uninstalling and reinstalling, but no dice. Have also tried "cycling" the options in MVAMS, without success. Any ideas?

Click on the frame of the WX Radar. The black poly should disappear. I've fixed this the other day so that won't be necessary. For some reason MVAMS is not connecting to the B737 in FSX. It seems to work fine in P3Dv4.2.

I'm still looking for the cause.