F-86 Non TP Switches and Payload problem
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
Re: F-86 Non TP Switches and Payload problem
I use the programmed switches on the X52 Pro, and then when that didn't work I used for the flaps:
Flaps (extend fully) F8
Flaps (extend incrementally) F7
Flaps (retract fully) F5
Flaps (retract incrementally) F6
...and for the trim:
Aileron trim (left) Ctrl + Num 4
Aileron trim (right) Ctrl + Num 6
Elevator trim (down) Not programmed other than the X52
Elevator trim (up) Not programmed other than the X52
Flaps (extend fully) F8
Flaps (extend incrementally) F7
Flaps (retract fully) F5
Flaps (retract incrementally) F6
...and for the trim:
Aileron trim (left) Ctrl + Num 4
Aileron trim (right) Ctrl + Num 6
Elevator trim (down) Not programmed other than the X52
Elevator trim (up) Not programmed other than the X52
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: F-86 Non TP Switches and Payload problem
Just to check, what are your expectations regarding the trim and flaps? When you make trim inputs does the stick move?
And the flaps, does the flap lever at least move?
And the flaps, does the flap lever at least move?
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
Re: F-86 Non TP Switches and Payload problem
I do half flaps for takeoff, the lever moves. If I go full flaps the lever moves. But regarding the trim I don't see the stick move nor will the aircraft trim...
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
Re: F-86 Non TP Switches and Payload problem
Correction, the stick does move, I tested it with the takeoff trim...
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: F-86 Non TP Switches and Payload problem
There isn't a half flaps position. The lever positions are UP, HOLD, and DOWN. When in UP or DOWN, the flaps will move in the respective direction until they reach their full limits. If the lever is moved to HOLD while they are in transit, they will stop where they are. Basically this allows an infinite number of flap positions. So it is working as designed.
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
Re: F-86 Non TP Switches and Payload problem
Ok, any luck on the lights?
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: F-86 Non TP Switches and Payload problem
Was waiting to solve the other issues first. I will get you a special lighting exe tomorrow so I can trace where the crash is occurring.
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
- doodlebug
- Posts: 1642
- Joined: Sun Feb 19, 2017 2:49 pm
- Location: LYX>YUL
Re: F-86 Non TP Switches and Payload problem
Try unzipping this into your F-86TP texture folder:
https://www.dropbox.com/s/xday8ffj0zezb ... L.zip?dl=0
G et the crash to occur and send me the crash log.
https://www.dropbox.com/s/xday8ffj0zezb ... L.zip?dl=0
G et the crash to occur and send me the crash log.
-
- Posts: 65
- Joined: Tue Nov 01, 2016 8:08 pm
Re: F-86 Non TP Switches and Payload problem
Strange, I don't know what I did before the last flight (without the new exe) but the lighting works now...