Blackbird Sims / Milviz Forum Archive

Latest Installer Milviz C310 v180220

CHANGELOG

• 2D Fuel Gauge modifications 3d lever Sync
• Gauge and panel .cfg updates

Run Uninstaller or delete old aircraft folders to remove unused files .

File Updated to resolve fuel flow imbalance and source issue in V4.2

Updated XML for 2D throttle popup
Updated Models for P3Dv4

Best CJ

Have a ask for the auxilary fuel tank lights. When I change the fuel-switch to the auxilary tanks than the lights are dark. In the v171202 the lights going on automaticaly when I change to the aux.tanks. For test the lights I can turn it on and the lights burns. Is this changed?
Gr harald

PS. When Changed to switch to "blue" (Maintanks) than the lights go on. Thats wrong. In the 3D-cockpit the left switch showing always a wrong side. Have change the fuel-flow from main-tanks than auxilary tanks .The fuel-flow is ALWAYS from the auxilary tanks. You can this see this in the main-menu "fuel and payload".

Hallo,
Have now tried the installer v180205 and it is the same error to v 180220. Only fuel-flow from the auyilary tanks. The switches in VC and 2d are not synchron.
In v171202 only the 2d popup working ok with the main and auyilary tanks, in VC is the same error, not synch to 2D.
Greeting Harald.

Installed v180220 this morning and I too have fuel selector issues. My findings are:-

1. Selector levers in VC and 2D views are synchronised.
2. With Main tanks selected the Aux indicator lamps are lit and fuel is drawn from the aux tanks, followed by main tanks when aux are empty.
3. With Aux tanks selected the aux lamps are not lit and fuel is drawn from aux tanks (did not check if engines stopped when aux are empty).

Can this be tweaked by config file settings or is it built into the model?

rgds
Mark A

The Selector levers in VC are synchronised , BUT when you change in 2D the left gauge z.b. to main tank (left side. blue) the VC go to the right side (yellow) . Up down is ok.
With v 171202 with Aux tanks selected, the aux lamps lit.
Gr. Harald

I have installed the up date and still have the same problem. Still can't tune the radios. NAV or COM.

mallan157 wrote:3. With Aux tanks selected the aux lamps are not lit and fuel is drawn from aux tanks (did not check if engines stopped when aux are empty).

Those yellow lights should only be illuminated when fuel in the aux (wingtip) tanks have reached critical level. It is a signal to the pilot that he needs to select the main tanks soonest...