C310 latest installer [v171127]

[dratatori]

All the same issues here, altimeter, right fuel selector inop, parking brake knop moves up to aux pump position when set. I also hear a latching sound in the cockpit that cycles about every 30 seconds. P3D 4.1 GTN 750/650 WX radar panel. Uninstalled and reinstalled no luck.

Thanks, Dave

[sunjunkiesi]

Complete uninstall and reinstall and no luck I am afraid. All the same issues as dratatori.

[N4GIX]

I also hear a latching sound in the cockpit that cycles about every 30 seconds.

That would be the pump for the door seal(s) cycling.

[sunjunkiesi]

Hi Bill

Pump is running whether the door seal is on or off.

Cheers

[snapshot21]

Im having the problem with the GTN750+650. Using p3dv4.1.
This is with a new install p3d and the c310r.

[sunjunkiesi]

Just in case this is important, mine is also a new build 4.1, ie not an upgraded 4.0 to 4.1. If your test machine is an upgraded version that might be relevant?

[N4GIX]

Hi Bill

Pump is running whether the door seal is on or off.

Cheers

According to Ken Stallings (owner of the C310R modeled) the pump runs continuously* to keep pressure available for the door seal system. The "chuff" sound heard is the pressure relief valve.

* as long as master battery power is on

[Chuck Jodry]

A solution to my dilemma came to mind overnight, I had eliminated all possibilities but one , I needed verified the version sent out was the version sent in , turns out that was the issue , MV was updating the host servers and with the entire repertoire of installers being transferred there was a mixup.

There will be appearing in your emails loyal and patient clients a notification of a new installer available , your problems will be solved once you run it .

Best CJ

[sunjunkiesi]

According to Ken Stallings (owner of the C310R modeled) the pump runs continuously* to keep pressure available for the door seal system. The "chuff" sound heard is the pressure relief valve.

* as long as master battery power is on

In that case a tip of the hat to you, and kudos for making it work.