Lots of CTD

Locked
EdW
Posts: 11
Joined: Sat Aug 19, 2017 2:36 am
Lots of CTD

Post by EdW » Wed Jul 18, 2018 6:47 pm

Hello,

Flew 10 times with this plane and unfortunately 8 times a CTD. Most of the times it happens during climb shortly after takeoff. The plane crashes even when all the engine gauges (torque <55%, ITT, RPM, Ng) are safely in the green zone, flaps up, speed of the sea plane below 120 IAS and climb speed is around 500 fpm. Tanks were 100% full, but just 2 passengers. Other times the engine suddenly stops working with no logical reason (all gauges green and settings conform checklist). Every time i want to reset the flight (engine can't be restarted) a CTD occurs. Enclosed the last crash report.

Frustrating these crashes, especially when you have to start up again p3d v4.3 after each crash and can't find a reason of the airplane failures.

Hopefuly you can find a cause in the attached crash reports.

Regards,
Edgar
Attachments
2018-07-18_1916.png
2018-07-18_1916.png (56.9 KiB) Viewed 1019 times
2018-07-18_1915_002.png
2018-07-18_1915_002.png (163.86 KiB) Viewed 1019 times
2018-07-18_1915_001.png
2018-07-18_1915_001.png (184.79 KiB) Viewed 1019 times
2018-07-18_1915.png
2018-07-18_1915.png (173.17 KiB) Viewed 1019 times
2018-07-18_1914.png
2018-07-18_1914.png (135.01 KiB) Viewed 1019 times

EdW
Posts: 11
Joined: Sat Aug 19, 2017 2:36 am
Re: Lots of CTD

Post by EdW » Wed Jul 18, 2018 8:02 pm

This is a screen shot just before the airplane gets overstressed which cases also a CTD (crash report attached).
Attachments
2018-07-18_2040.png
2018-07-18_2040.png (2.98 MiB) Viewed 1008 times
2018-07-18_2030_002.png
2018-07-18_2030_002.png (5.43 KiB) Viewed 1008 times
2018-07-18_2030_001.png
2018-07-18_2030_001.png (189.13 KiB) Viewed 1008 times
2018-07-18_2030.png
2018-07-18_2030.png (224.73 KiB) Viewed 1008 times
2018-07-18_2029.png
2018-07-18_2029.png (182.47 KiB) Viewed 1008 times

EdW
Posts: 11
Joined: Sat Aug 19, 2017 2:36 am
Re: Lots of CTD

Post by EdW » Sat Aug 04, 2018 2:01 pm

No CTD's any more after installing SP1. Thanks!


Locked

Return to “DHC-3T Turbo Otter Support Forum”