Page 1 of 1

Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Thu May 12, 2022 6:49 pm
by manuel.drews
Hello,

I bought the Milviz MV310 today. Unfortunately, I have a problem right at the beginning that still somewhat denies me the joy of the purchase.

I fly directly on the Pc and use both the Yoke of Honeycomb, as well as the Throttle. In addition, I use Thrustmaster pedals for the rudder. I have not changed the configuration in recent months.

When I take off with the plane directly from the runway and slowly accelerate, the entire flight system turns to the right. This is not due to wind or incorrect trim. I have now tried it several times at different airports.

Taking off is not possible at the moment, because the plane starts to turn in circles every time.

Does anyone have an idea how I can solve this or if I am making a mistake in the operation? Or is this a known bug?

It's a pity that it doesn't work at the moment. I can't take off like this at the moment.

Thanks for any tips!

Manuel

Translated with www.DeepL.com/Translator (free version)

Re: Takeoff MV310 not possible... immediately turns?

Posted: Thu May 12, 2022 9:12 pm
by Slayer
Your Honeycomb hardware is forcing the autopilot on. Several other users of that hardware have reported similar issues.

Re: Takeoff MV310 not possible... immediately turns?

Posted: Fri May 13, 2022 7:00 pm
by smotheredrun
The Milviz FB page had a solution from another user: Select a different AP mode i.e. HDG instead of ALT. The autopilot should deactivate until you tell it to.

Re: Takeoff MV310 not possible... immediately turns?

Posted: Fri May 13, 2022 10:09 pm
by manuel.drews
Thanks so much. That solved the problem!

Many greetings,
Manuel

Re: Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Fri Jul 08, 2022 3:41 am
by mehogberg
You should create a new profile for the Alpha(Yoke) and the Bravo(Throttle) make sure there are no key binds on the Alpha for the Autopilot.
It should work fine. Sounds like I have the same setup as you.

Re: Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Sun Jul 10, 2022 4:29 am
by smotheredrun
mehogberg is correct. New profiles, set them up specifically for the 310. Profit

Re: Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Fri Jul 15, 2022 4:50 pm
by mehogberg
Off topic...but does anyone have feathering working with the Honeycomb Bravo TQ. Mine is close but what works for the Baron does not work for the 310. Any insight would be helpful.

tia

Re: Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Sat Sep 17, 2022 7:23 am
by 6yyaar
mehogberg wrote:
Fri Jul 08, 2022 3:41 am
You should create a new profile for the Alpha(Yoke) and the Bravo(Throttle) make sure there are no key binds on the Alpha for the Autopilot.
It should work fine. Sounds like I have the same setup as you.
Did as suggested. The Alpha now has no Autopilot key binds. But once I activate the autopilot the left wing drops.

Re: Takeoff MV310 not possible... immediately turns? [Honeycomb turns on AP]

Posted: Sun Sep 18, 2022 1:15 pm
by Slayer
6yyaar wrote:
Sat Sep 17, 2022 7:23 am
mehogberg wrote:
Fri Jul 08, 2022 3:41 am
You should create a new profile for the Alpha(Yoke) and the Bravo(Throttle) make sure there are no key binds on the Alpha for the Autopilot.
It should work fine. Sounds like I have the same setup as you.
Did as suggested. The Alpha now has no Autopilot key binds. But once I activate the autopilot the left wing drops.
That is a different issue. There are a couple of threads on that already. Should be addressed when the service release is final.