Blackbird Sims / Milviz Forum Archive

Hi,
I have a problem with ILS approach with KA350i Milviz. I have created a flight plan from Marseille to Nice with On Line Flight Planner which works very well. However, when arriving near Nice Airport with a reference altitude above the upper limit indicated on the last intersection point and press the APPR button, FMS does commute to APPR FMS but the plane continue its direct route to the airport, and FMS never commute from APPR FMS to APPR LOC1. What do I miss to never activate ILS approach ? I can add that NAV radios are set on AUTO-tune, TCAS on TA/RA and FMS on TDK-MJ and LOC1.This happens whatever I preset NAV1 =109.95 or not and the same for CRC1=46°. Any advice would be greatly appreciated.

Francis

Hi Francis a screenshot of the displays may help if you encounter this again. I also recall something about baro's on both sides have to be in sync.

Another user posted some good documentation for the real deal in this thread if you really want to dig into the docs
viewtopic.php?f=104&t=11397


Also some videos on the FMS in our product section of the 350i page
https://milviz.com/flight/products/KA350/index.php

Slayer wrote: ↑

Mon Aug 03, 2020 9:45 pm

Hi Francis a screenshot of the displays may help if you encounter this again. I also recall something about baro's on both sides have to be in sync.

Another user posted some good documentation for the real deal in this thread if you really want to dig into the docs
viewtopic.php?f=104&t=11397


Also some videos on the FMS in our product section of the 350i page
https://milviz.com/flight/products/KA350/index.php

Thank you very much, I will have a look on these docs

Francis