RealLight Initialization Error

Post your support request in the sub-forum that corresponds to your product
Locked
JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: RealLight Initialization Error

Post by JonathanBleeker » Wed Sep 11, 2019 5:22 pm

Indeed could be

rayfarrugia1
Posts: 10
Joined: Fri Jul 20, 2018 12:44 pm
Re: RealLight Initialization Error

Post by rayfarrugia1 » Thu Sep 12, 2019 11:37 am

Thx for the responses
Changing 1B to 18 seems to have resolved the problem for the straight model.
Unfortunately the same fix does not help the Amphibian, Ski and Float models.
Problem appears worse.
Getting a little frustrating this!
Once again thx for the responses so far.
cheers
Image

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: RealLight Initialization Error

Post by JonathanBleeker » Thu Sep 12, 2019 12:23 pm

Check the RealLight folders in those models as well?

rayfarrugia1
Posts: 10
Joined: Fri Jul 20, 2018 12:44 pm
Re: RealLight Initialization Error

Post by rayfarrugia1 » Thu Sep 12, 2019 9:59 pm

Sorry if I wasn't clear - I applied the same fix to all the other models with no luck.
Happy to post the directories again if you need.
thx
Ray

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: RealLight Initialization Error

Post by JonathanBleeker » Fri Sep 13, 2019 9:53 am

Please do :)

rayfarrugia1
Posts: 10
Joined: Fri Jul 20, 2018 12:44 pm
Re: RealLight Initialization Error

Post by rayfarrugia1 » Fri Sep 13, 2019 12:15 pm

Here they are from the ski variant.
I checked all the others and they look the same as these.
Thx again
Image
Image
Image
Image

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: RealLight Initialization Error

Post by JonathanBleeker » Fri Sep 13, 2019 3:20 pm

That x2.bmp is also a culprit

rayfarrugia1
Posts: 10
Joined: Fri Jul 20, 2018 12:44 pm
Re: RealLight Initialization Error

Post by rayfarrugia1 » Sat Sep 14, 2019 2:32 am

OK thx and seems to have done the trick.
Is this a problem ongoing?
I sure hope not.
Once again thx.
Regards
Ray

BrianV
Posts: 22
Joined: Sat May 27, 2017 9:00 pm
Re: RealLight Initialization Error

Post by BrianV » Thu Oct 03, 2019 9:25 am

Only saw this now after having tried the Twin Comanche in P3D 4.5 hotfix 2. It stated the problem with RealLight, so I thought I better remove it by deinstalling and reinstalling the aircraft. Bad idea, now if I try to load the aircraft the entire sim crashes. However, I re-downloaded the installer and it turns out that a slightly never version was available. This did the trick, it is working fine again (although FPS is for odd reasons still very low at least when it rains).

lee.s.joseph
Posts: 1
Joined: Mon Oct 07, 2019 11:33 am
Re: RealLight Initialization Error

Post by lee.s.joseph » Mon Oct 07, 2019 12:08 pm

I deleted all the x2 and 1B files in all variants of the DHC-3 Turbo, and upon loading the aircraft I got one warning (instead of multiple, which happened before the deletion of the aforementioned files), the aircraft was loaded but I wasn't able to operate the engine start procedure nor could I seem to move the engine thrust lever, and P3D4 crashed to desktop shortly after

I think we will have to wait for an official update/fix on this, hopefully soon!

thanks

harry.martin
Posts: 3
Joined: Sat Nov 09, 2019 10:32 pm
Re: RealLight Initialization Error

Post by harry.martin » Sat Nov 09, 2019 11:46 pm

No final fix in sight? After four(!) months of problem reports?
This is very disappointing for a new customer (Turbo Otter).

Harry

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: RealLight Initialization Error

Post by doodlebug » Mon Nov 11, 2019 5:55 pm

Please be patient. We will get to it.
In the meantime, it is a relatively easy problem for a user to fix.

Issues connected with control levers and gauges are unrelated and most likely caused by a bad XMLTools install.

harry.martin
Posts: 3
Joined: Sat Nov 09, 2019 10:32 pm
Re: RealLight Initialization Error

Post by harry.martin » Fri Nov 15, 2019 7:11 pm

doodlebug wrote:
Mon Nov 11, 2019 5:55 pm
Please be patient. We will get to it.
In the meantime, it is a relatively easy problem for a user to fix.

Issues connected with control levers and gauges are unrelated and most likely caused by a bad XMLTools install.
easy to fix? how?

I deleted the 1B file / renamed it to 18 which fixed the "normal" TwinOtter but "amphibian" and other still giving multiple error messages.

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: RealLight Initialization Error

Post by doodlebug » Fri Nov 15, 2019 8:13 pm

harry.martin wrote: "....amphibian" and other still giving multiple error messages.
RealLight error messages?

harry.martin
Posts: 3
Joined: Sat Nov 09, 2019 10:32 pm
Re: RealLight Initialization Error

Post by harry.martin » Sat Nov 16, 2019 7:54 pm

doodlebug wrote:
Fri Nov 15, 2019 8:13 pm
harry.martin wrote: "....amphibian" and other still giving multiple error messages.
RealLight error messages?
yes.


Locked

Return to “Support Forums”