Probably noob question on Takeoff (plane does not rise)

[Ale-V]

Hi,

i'm enjoying F4/E advanced series since last week, still in familiarization phase / instructor mode... Yesterday i had a lot of takeoff problems, the plane doesn't (literally) leave the runway,.. it is something like i have a lot of powerfull glue on the gears...

Flaps out and down, pitch aug engaged, i push brakes until the engine is ready than full military power and i pull the stick when i reach the white (mach 0,3-0,4 or even more). If i pull very much the stick the plane sometimes lift the runway but in stall attitude.

The strange thing is that i was not experiencing this until i installed EZDOK camera V2... now, if i do a fresh install with standard model ok, but adv the problem remains.

Probably i increased realism setting and put realistic landing gear in the meanwhile, can be that? But i cannot understand how i could have damaged the gears. Should i try lift around 150 knots? Or could that be a compatibility issue? Ore maybe too much vibrations?

Sorry, i suspect it is a very noob question but cannot figure out searching web and the manual...!!

Thx

[doodlebug]

EZDOK is the culprit!

[Ale-V]

Thank you i just saw another thread about Ezdok incompatibility...!

So what could i do? I like Ezdok, is there a solution that is not disabling it?

[doodlebug]

Apparently disabling it in the its menu doesn't work (viewtopic.php?f=101&t=8570&hilit=EZDOK#p74300) . Substituting ChasePlane is the recommended option as EZDOK clashes with our programming.

[Ale-V]

Thank you but if possible i don't want to buy another software...!!

It seems that someone solved it disabling shakes, waiting for explanation here

http://www.simforums.com/forums/topic59 ... tml#377753

[Ale-V]

os during the flight EZDOK is doing well its job... it seems just a takeoff problem to me i will try different EZDOK setting when i will be at home at report it here

[Ale-V]

Good morning

Yesterday i tried disabling ezdok fuselage shakes (the slider which can be set to off ground or on from the gnd to off position and it worked! It is very simple it seems that the vibrations of the aircraft body dont let the aircraft takeoff

I suggest trying uninstalling ezdok

[wen]

Thank you i just saw another thread about Ezdok incompatibility...!

So what could i do? I like Ezdok, is there a solution that is not disabling it?

Try ChasePlane.

[Ale-V]

Thank you i just saw another thread about Ezdok incompatibility...!

So what could i do? I like Ezdok, is there a solution that is not disabling it?

Try ChasePlane.

like i said problem solved, infact ezdok actually works with a little effort (disable fuselage shakes), i don't want to buy also chaseplane
thx
bye