Page 1 of 2
310R Redux Installer v3.180330.2 -OBSOLETE-
Posted: Fri Mar 30, 2018 11:11 pm
by N4GIX
Link Removed
I know that the updates have come "fast and furious" but the last two minor squawks have now been fixed, and we are solid GOLD!
CHANGE LOG
===========
1. GTX330 "Countdown Timer" will now sound a soft chime instead of my raspy voice announcing "Timer Expired". It will repeat the chime every time the timer is run now.
2. GTX330 "Density Altitude" is now being calculated correctly.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Fri Mar 30, 2018 11:24 pm
by kowen
Look like there is a GTN430 panel over where the 530 should be..using RXP 530/430 with WX.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Fri Mar 30, 2018 11:34 pm
by N4GIX
kowen wrote:Look like there is a GTN430 panel over where the 530 should be..using RXP 530/430 with WX.
I honestly do not see how, as these are the only ones that should display:
Code: Select all
1 (>L:MV_AudioPanel,bool)
1 (>L:RXP_GNS530,bool)
1 (>L:RXP_GNS430,bool)
1 (>L:MV_KAP140,bool)
1 (>L:MV_GTX330,bool)
1 (>L:MV_ADF,bool)
1 (>L:MV_WX,bool)
And this is what I see here in P3Dv4.2
And this is FSX. I don't have RXP installed on this machine but the frames are present.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Fri Mar 30, 2018 11:38 pm
by kowen
I loaded 530/430 without WX . It was fine and then reloaded 430/530 w/ WX and all good. I was chasing your releases so something may have got wacked. All good.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Fri Mar 30, 2018 11:44 pm
by N4GIX
kowen wrote:I loaded 530/430 without WX . It was fine and then reloaded 430/530 w/ WX and all good. I was chasing your releases so something may have got wacked. All good.
That is entirely possible! Sometimes weird stuff just happens...
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 11:35 am
by rudi0310
All Ok here with the radio frames, tested
-default wx and
-RXP530/430 (no RXP installed)
no issues with cold and dark
thanks for the great support, Bill!
Rudi
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 2:04 pm
by kini
Thank you for the update
Kind regards
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 8:17 pm
by AlexZander_D
Miss me? Just perform CLEAN update and here is the first issue.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 8:36 pm
by AlexZander_D
And here you are something else (panel "Default"). Happens when clicking on any GPS.
Also, after clicking on GPS then NAV mode disconnected and no chance to turn it on again. Even if plane on the path and even turn on/off VLOC/GPS modes.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 8:41 pm
by rudi0310
AlexZander_D wrote:Miss me?
No.
AlexZander_D wrote:here is the first issue.
looks good here
- ccd6.jpg (80.22 KiB) Viewed 3192 times
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 9:17 pm
by AlexZander_D
AlexZander_D wrote:here is the first issue.
looks good here[/quote]
Yeap! But now try to turn on the instruments/engines and etc. backlight)))
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 9:52 pm
by rudi0310
you are right;
- cd6.jpg (72.95 KiB) Viewed 3182 times
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 10:35 pm
by AlexZander_D
rudi0310 wrote:you are right;
Do you have any doubts about it?)))
Guys, also check one more issue. All batteries and any other power sources are off, but the backlight is working)
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 11:10 pm
by N4GIX
Which sim version shows the screwed up lighting? I ask because FSX and P3D use entirely separate bitmaps.
There is supposed to be logic to kill the lighting when the battery is off, the engines are stopped or running but the generators are off.
Re: 310R Redux Installer v3.180330.2 - RELEASE -
Posted: Sat Mar 31, 2018 11:11 pm
by rudi0310
P3D V4.2