310R Redux Installer v3.180330.2 -OBSOLETE-

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
310R Redux Installer v3.180330.2 -OBSOLETE-

Post by N4GIX » Fri Mar 30, 2018 11:11 pm

Link Removed

I know that the updates have come "fast and furious" but the last two minor squawks have now been fixed, and we are solid GOLD!

CHANGE LOG
===========
1. GTX330 "Countdown Timer" will now sound a soft chime instead of my raspy voice announcing "Timer Expired". It will repeat the chime every time the timer is run now.
2. GTX330 "Density Altitude" is now being calculated correctly.
Last edited by N4GIX on Tue Apr 03, 2018 11:34 pm, edited 2 times in total.

kowen
Posts: 11
Joined: Fri Mar 16, 2018 5:33 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by kowen » Fri Mar 30, 2018 11:24 pm

Look like there is a GTN430 panel over where the 530 should be..using RXP 530/430 with WX.

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by N4GIX » Fri Mar 30, 2018 11:34 pm

kowen wrote:Look like there is a GTN430 panel over where the 530 should be..using RXP 530/430 with WX.
I honestly do not see how, as these are the only ones that should display:

Code: Select all

           1 (>L:MV_AudioPanel,bool)
           1 (>L:RXP_GNS530,bool)
           1 (>L:RXP_GNS430,bool)
           1 (>L:MV_KAP140,bool)
           1 (>L:MV_GTX330,bool)
           1 (>L:MV_ADF,bool)
           1 (>L:MV_WX,bool)
And this is what I see here in P3Dv4.2
Image
And this is FSX. I don't have RXP installed on this machine but the frames are present.
Image
Last edited by N4GIX on Fri Mar 30, 2018 11:42 pm, edited 1 time in total.

kowen
Posts: 11
Joined: Fri Mar 16, 2018 5:33 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by kowen » Fri Mar 30, 2018 11:38 pm

I loaded 530/430 without WX . It was fine and then reloaded 430/530 w/ WX and all good. I was chasing your releases so something may have got wacked. All good.

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by N4GIX » Fri Mar 30, 2018 11:44 pm

kowen wrote:I loaded 530/430 without WX . It was fine and then reloaded 430/530 w/ WX and all good. I was chasing your releases so something may have got wacked. All good.
That is entirely possible! Sometimes weird stuff just happens... :roll:

rudi0310
Posts: 36
Joined: Sat Jun 03, 2017 5:49 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by rudi0310 » Sat Mar 31, 2018 11:35 am

All Ok here with the radio frames, tested
-default wx and
-RXP530/430 (no RXP installed)

no issues with cold and dark

thanks for the great support, Bill!
Rudi

kini
Posts: 4
Joined: Tue Mar 20, 2018 3:35 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by kini » Sat Mar 31, 2018 2:04 pm

Thank you for the update

Kind regards

AlexZander_D
Posts: 17
Joined: Sun Mar 18, 2018 1:06 am
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by AlexZander_D » Sat Mar 31, 2018 8:17 pm

Miss me? Just perform CLEAN update and here is the first issue.
Image

AlexZander_D
Posts: 17
Joined: Sun Mar 18, 2018 1:06 am
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by AlexZander_D » Sat Mar 31, 2018 8:36 pm

And here you are something else (panel "Default"). Happens when clicking on any GPS.
Image
Image
Also, after clicking on GPS then NAV mode disconnected and no chance to turn it on again. Even if plane on the path and even turn on/off VLOC/GPS modes.
Last edited by AlexZander_D on Sat Mar 31, 2018 8:42 pm, edited 1 time in total.

rudi0310
Posts: 36
Joined: Sat Jun 03, 2017 5:49 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by rudi0310 » Sat Mar 31, 2018 8:41 pm

AlexZander_D wrote:Miss me?
No.
AlexZander_D wrote:here is the first issue.
looks good here
ccd6.jpg
ccd6.jpg (80.22 KiB) Viewed 2797 times

AlexZander_D
Posts: 17
Joined: Sun Mar 18, 2018 1:06 am
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by AlexZander_D » Sat Mar 31, 2018 9:17 pm

AlexZander_D wrote:here is the first issue.
looks good here[/quote]
Yeap! But now try to turn on the instruments/engines and etc. backlight)))

rudi0310
Posts: 36
Joined: Sat Jun 03, 2017 5:49 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by rudi0310 » Sat Mar 31, 2018 9:52 pm

you are right;
cd6.jpg
cd6.jpg (72.95 KiB) Viewed 2787 times

AlexZander_D
Posts: 17
Joined: Sun Mar 18, 2018 1:06 am
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by AlexZander_D » Sat Mar 31, 2018 10:35 pm

rudi0310 wrote:you are right;
Do you have any doubts about it?)))
Guys, also check one more issue. All batteries and any other power sources are off, but the backlight is working)
Image

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by N4GIX » Sat Mar 31, 2018 11:10 pm

Which sim version shows the screwed up lighting? I ask because FSX and P3D use entirely separate bitmaps.

There is supposed to be logic to kill the lighting when the battery is off, the engines are stopped or running but the generators are off.

rudi0310
Posts: 36
Joined: Sat Jun 03, 2017 5:49 pm
Re: 310R Redux Installer v3.180330.2 - RELEASE -

Post by rudi0310 » Sat Mar 31, 2018 11:11 pm

P3D V4.2


Locked

Return to “310 Redux Support Forum”