CTD when WX selected with HiFi AS4 6641 build

[kowen]

I have the single radar as well and will reinstall and report back.

[robains]

I did have the MV_WX.DLL in my gauges folder, renamed it and the WX radar is working perfectly now ... tested for about 1 hour with AS4. The only possible issue I noticed is that the tilted seemed a little off ... in real world aircraft with weather radar I've noticed while on the ground and taxi they use max tilt (15 degrees or so), once airborne and climbing they use around 5 degrees tilt until above cloud layers. The MV WX seemed to be about 5 degrees off .. at level flight with clouds above me I had to use 0 degree to get a reading in the scan, if I used +5 degrees I got no returns.

Made another video with some nasty weather out of LIEO ... everything working great and I really felt a part of the aircraft.

Cheers, Rob.

[kowen]

@Rob can you confirm you do not have a MV_WX.dll in the main gauges folder? LM changed the folder priority for gauge loading from the panel to the gauges folder. Since REX hasn't released the full WX for v4.2 yet, chances are if you have it, it is trying to load the v4.1 WX instead. If you rename the MV_WX.dll in your gauges folder, it should start working.

I did this and it worked for me...no issue now.