p3d crashed to deskop

[helbel]

Hallo , Whit my Beaver p3d 4.2 (Win7) and installed wx-radar p3d crashed to desktop when it load the beaver.
Fehlerhafte Anwendung zeigt Milviz_Lightnign_Service.exe
Fehlerhaftes Modul zeigt system32\MSVCR100.dll
Greetings Harald.

[JonathanBleeker]

Sim set to run as admin? Right click on your P3D, go to Properties->Compatibility and make sure Run this program as administrator is checked (it may have changed with your latest P3D update). Not sure what that is in german.

[helbel]

Yes, run as admin. And Microsoft Visual c 2010 is the latest version.

[JonathanBleeker]

Does it work if you don't use a panel with the WX?

[helbel]

Whitout the wx panel installed the beaver goes fine. no crash.

[Krazycolin]

what sim are you using?

[helbel]

P3D v4.2 , Win7 64

[Krazycolin]

That’s why. It requires the latest version of the sim. 4.3.

[helbel]

I have only p3d 4.2 and the latest installer for the beaver is here "171229.exe" from 29.12.17
A new install with the beaver shows a message:" Failed to create Render Target" , then "Failed to render target view". And than: "Milviz Lighting service funkioniert nicht mehr" . Milviz Lighting Service shut down. The wx-radar is working, the map-lights and night lights in the cockpit don´t burn and no crash to desktop. So I have no cockpit-lights.
The MV_WX.dll is 1.40.0.38.
With MV_WX.dll 1.40.0.40 (from my C310) P3D crashed to desktop.
My C310 Reduce with wx radar works fine and ok.
GR harald

[helbel]

What I have found now:
1. When I directly load a flight with the beaver ( or an save flight), then the Milviz LightingService shut down and no lights in the cockpit
2. Than I load another aircraft (not the beaver).
3. And now I load the beaver again and the lights come back. The MilvizLightingService is loading again.
It seems I cannot load the beaver from the startmenu. What is
wrong?
Greetings Harald.

[JonathanBleeker]

Are you using any special graphics card settings for P3D outside of the P3D graphics menu?

[helbel]

Only "Negative Lodbios = allow" in NVIDIA-Inspector.
In the original installer is the mv_wx.dll file version 1.40.0.38. Is this actuell for the beaver?
I have copied this file from my C310 redux (Version 1.40.0.40) to the beaver, but is the same as above. I must load the beaver a second time and then the Milviz Lighting Service come back and the lights goes on.

[helbel]

Have copied the failurelist:

Protokollname: Application
Quelle: Application Error
Datum: 08.08.2018 09:47:31
Ereignis-ID: 1000
Aufgabenkategorie:(100)
Ebene: Fehler
Schlüsselwörter:Klassisch
Benutzer: Nicht zutreffend
Computer: Harald-PC
Beschreibung:
Name der fehlerhaften Anwendung: Milviz_Lighting_Service.exe, Version: 1.1.4.0, Zeitstempel: 0x5934ee42
Name des fehlerhaften Moduls: MSVCR100.dll, Version: 10.0.40219.325, Zeitstempel: 0x4df2bcac
Ausnahmecode: 0x40000015
Fehleroffset: 0x00000000000761c9
ID des fehlerhaften Prozesses: 0x630
Startzeit der fehlerhaften Anwendung: 0x01d42eec09891ca3
Pfad der fehlerhaften Anwendung: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\DHC-2 Beaver Milviz\nightlighting\Milviz_Lighting_Service.exe
Pfad des fehlerhaften Moduls: C:\Windows\system32\MSVCR100.dll
Berichtskennung: 4d934b78-9adf-11e8-b79b-4487fcfa2fc9
Ereignis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2018-08-08T07:47:31.000000000Z" />
<EventRecordID>207336</EventRecordID>
<Channel>Application</Channel>
<Computer>Harald-PC</Computer>
<Security />
</System>
<EventData>
<Data>Milviz_Lighting_Service.exe</Data>
<Data>1.1.4.0</Data>
<Data>5934ee42</Data>
<Data>MSVCR100.dll</Data>
<Data>10.0.40219.325</Data>
<Data>4df2bcac</Data>
<Data>40000015</Data>
<Data>00000000000761c9</Data>
<Data>630</Data>
<Data>01d42eec09891ca3</Data>
<Data>C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\DHC-2 Beaver Milviz\nightlighting\Milviz_Lighting_Service.exe</Data>
<Data>C:\Windows\system32\MSVCR100.dll</Data>
<Data>4d934b78-9adf-11e8-b79b-4487fcfa2fc9</Data>
</EventData>
</Event>

[JonathanBleeker]

Odd....It should be using RealLight. Will get back to you.

[Chuck Jodry]

Real Light was not included in the DHC-2 nor the DHC-3 , this was added to the DHC-3 T as a feature along with Real Glass as an incentive to our clientele to purchase the additional package. Our New High Definition Navigation ensemble included NavStax and F1 430 530 support .

The new feature list in the DHC-3 T was decidedly attractive but its inclusion in previous releases would necessitate a rebuild that at this stage has not been discussed or planned .

Best CJ