Blackbird Sims / Milviz Forum Archive

hey Guys,
having issues with Sound , and lighting on the updated Huey , is there something I'm missing. I turned off AV during installation.

FireRx,

sorry that I do not have an answer but only a question: is the old Sendowl-link still valid, and did you install the version "Milviz_UH1_C_H_v1.170803"?

Thank you,
Michael

yes I did,
Everything esle seems to work except the interior lighting , and on the Sound pack , it's just the blade slap that is affected.

It seems to be a preliminary version: on their Facebook page, they say that it will be out "soon".

Michael

okay, thanks

The interior lighting works in v4 if you've download and installed with your av off and you've disabled av scanning on your sim directory Tory and you've got uac disabled and you do not have the Estonia tool active and you've run the sim as an admin.

Krazycolin,

is the version of 3rd August the most recent one?

Thank you,
Michael

Yes

Colin ,
That didn't work for me bro. as you know I pretty much have all Milviz Helos so I'm aware about downloading /installing with AV off. and doing things in Admin mode. also the sound gau ,, is that x64 bit now or the same 32 bit gau. just noticed the file name. I never used Estonia tool. Don't even know what it is. LOL

the blade slap isn't likely to work in v4 so we'll have to ignore that.

The night lighting should be working... when you run the sim and load the chopper, do you see anything with NL (and MV) in the task process manager?

The MV3D Sound module distributed with the V4 Huey is a 64 bit sound module.

Do you hear the sound of the switches clicking? If so, that's the 3D sound in action. If you don't hear that, you won't hear blade slap since it depends on the MV3D sound module.

Conversely, if you do hear the switches, then you should also hear the blade slap. I can hear it clearly on my V4 system.

The MV lighting not working is probably the module not loading. If it doesn't load, then maybe the sound module isn't loading either.

Again, all that - lighting and blade slap and all sounds - work fine on my V4 test system, I just made a short flight to test it.

Checking in Milviz_Bell_UH1C\panel ... what are the sizes of your MV3Dsound.dll and Milviz_Lighting_Gauge.dll?

This is to see if somehow a wrong version got shipped.

Dutch

I have both Switches click and blade snap when descending.

Michael

I'ss start it up and check again, Colin.
As for the blade slap I have thaT UPDATED Bladeslap gauge that was updated that I can insert in the panel the new one is :dsd_p3d_xml_sound_x64!Sound

Dutch wrote:The MV3D Sound module distributed with the V4 Huey is a 64 bit sound module.

Do you hear the sound of the switches clicking? If so, that's the 3D sound in action. If you don't hear that, you won't hear blade slap since it depends on the MV3D sound module.

Conversely, if you do hear the switches, then you should also hear the blade slap. I can hear it clearly on my V4 system.

The MV lighting not working is probably the module not loading. If it doesn't load, then maybe the sound module isn't loading either.

Again, all that - lighting and blade slap and all sounds - work fine on my V4 test system, I just made a short flight to test it.

Checking in Milviz_Bell_UH1C\panel ... what are the sizes of your MV3Dsound.dll and Milviz_Lighting_Gauge.dll?

This is to see if somehow a wrong version got shipped.

Dutch

MV3DSound.dll = 244kb, Modified 7/31/2017
Milviz_Lighting_Guage.dll= 84kb Modified 7/31/2017

is what I have Dutch.

nope , no button click at all. Colin can you resend me the link Please. I used the original link sent to me when I purchased the Huey that I still had from my email.