Blackbird Sims / Milviz Forum Archive

Read-only archive for legacy products
https://milviz.com/forum/

Cannot Launch Huey - P3D close immediatly

https://milviz.com/forum/viewtopic.php?f=133&t=10742

Page 1 of 1

Cannot Launch Huey - P3D close immediatly

Posted: Fri May 31, 2019 1:20 pm
by laurent
i select any of the Uh-1H from Milviz , then click OK at the lower right, P3D starts and closes immediatly.
Annotation 2019-05-31 141927.jpg
Annotation 2019-05-31 141927.jpg (187.73 KiB) Viewed 7213 times

Re: Cannot Launch Huey - P3D close immediatly

Posted: Fri May 31, 2019 1:32 pm
by laurent
I tried to uninst / reinstall and i noticed this
exe name says 1.17xxx and installer once launched says 1.16xxxx
Annotation 2019-05-31 143030.jpg
Annotation 2019-05-31 143030.jpg (175.89 KiB) Viewed 7210 times
downloaded from Aerosoft

Re: Cannot Launch Huey - P3D close immediatly

Posted: Fri May 31, 2019 3:47 pm
by doodlebug
OK - i see the issue - the current installer is MV_MD530_vA1.180709.zip

It is available here: http://milviz.com/forum/viewtopic.php?f=107&t=9672
I will ask aerosoft to update their download.

Re: Cannot Launch Huey - P3D close immediatly

Posted: Fri May 31, 2019 6:25 pm
by Raptor
Oisin, he's asking about the Huey and you provided the 530 installer

Re: Cannot Launch Huey - P3D close immediatly

Posted: Fri May 31, 2019 7:06 pm
by doodlebug
I'm losing it
thanks for the heads up & apologies all round

The name within the installer was not updated, but the .17xxxx installer is the right one.

Re: Cannot Launch Huey - P3D close immediatly

Posted: Sat Jun 01, 2019 12:37 pm
by laurent
it still dont work ... the one i downloaded here is the same as the one on Aerosoft website , and it still dont work ... :(

Re: Cannot Launch Huey - P3D close immediatly

Posted: Sat Jun 01, 2019 1:54 pm
by laurent
Here's a log
- No log file was preset
- I started P3D , with the default Aircraft.
- Menu vehicule / loaded the 1st Uh

Code: Select all

[error.0]
error=Texture UH1C_1_T.DDS failed to load (FE_REQUEST_STATUS==13)

[error.1]
error=Texture UH1C_1_T_BUMP.DDS failed to load (FE_REQUEST_STATUS==13)

[error.2]
error=Texture FRESNEL_RAMP.DDS failed to load (FE_REQUEST_STATUS==13)

[error.3]
error=Texture UH1C_1_T_SPEC.DDS failed to load (FE_REQUEST_STATUS==13)

[error.4]
error=Texture NONAME.BMP failed to load (FE_REQUEST_STATUS==13)

[error.5]
error=Texture WINREF_T.DDS failed to load (FE_REQUEST_STATUS==13)

[error.6]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.7]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationPower"

[error.8]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.9]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationPower"

[error.10]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.11]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationPower"

[error.12]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.13]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationPower"

[error.14]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // IFF
			
			(L:VRSTP TACPACK PRESENT, number) 0 > if{
				(L:UH1_MODE4_ACTIVE,bool) 1 == if{
					(L:CURRENT_MODE4,bool) 0 == if{
						1 (>L:CURRENT_MO

[error.15]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "IFF" in: IFF
			
			(L:VRSTP TACPACK PRESENT, number) 0 > if{
				(L:UH1_MODE4_ACTIVE,bool) 1 == if{
					(L:CURRENT_MODE4,bool) 0 == if{
						1 (>L:CURRENT_MODE

[error.16]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Radar:Mode4Active"

[error.17]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Radar:Mode4Code"

[error.18]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Radar:Mode4Active"

[error.19]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // MASTER ARM
	
			0 (>L:MASTER_ARMED,bool)
			(L:VRSTP TACPACK PRESENT, number) 0 > if{
				(L:PRIMARY BUS,bool) 1 == if{
					(L:uh1_visibility_weapons,

[error.20]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "MASTER ARM
	
			0 (>L:MASTER_ARMED,bool)
			(L:VRSTP TACPACK PRESENT, number) 0 > if{
				(L:PRIMARY BUS,bool) 1 == if{
					(L:uh1_visibility_weapons,bool) 1 == if{
						(L:uh1_switch_armament_arm,

[error.21]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "ARM" in: ARM
	
			0 (>L:MASTER_ARMED,bool)
			(L:VRSTP TACPACK PRESENT, number) 0 > if{
				(L:PRIMARY BUS,bool) 1 == if{
					(L:uh1_visibility_weapons,bool) 1 =

[error.22]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Util:TriggerStateRaw"

[error.23]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Util:TriggerStateMomentary"

[error.24]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ".750" in: .750 < if{
							0 (>L:TRIGGER_ONCE,bool)
						}
					}
				}
			} els{
				(C:VRSTP_Util:TriggerStateRaw,bool) (>L:uh1_fire,bool)
				(C:VRSTP_Util:T

[error.25]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Util:TriggerStateRaw"

[error.26]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_Util:TriggerStateMomentary"

[error.27]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // SHOOT:
			
			(L:MASTER_ARMED,bool) 1 == if{
				(L:uh1_switch_rocket_armamentselector,enum) 2 == if{
					
					3200 (>C:VRSTP_SMS:StationFiringRate, 

[error.28]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "SHOOT:
			
			(L:MASTER_ARMED,bool) 1 == if{
				(L:uh1_switch_rocket_armamentselector,enum) 2 == if{
					
					3200 (>C:VRSTP_SMS:StationFiringRate, number)
					0 (>C:VRSTP_SMS:StationIdx, number)

[error.29]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationFiringRate"

[error.30]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.31]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.32]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationFire"

[error.33]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.34]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.35]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationFire"

[error.36]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.37]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.38]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.39]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.40]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "//" in: // Actually shoot queued rockets - 1 pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:Stati

[error.41]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "Actually shoot queued rockets - 1 pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:VRSTP_SM

[error.42]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "shoot queued rockets - 1 pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:VRSTP_SMS:Station

[error.43]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "queued rockets - 1 pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:VRSTP_SMS:StationFire, 

[error.44]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "rockets - 1 pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:VRSTP_SMS:StationFire, bool)
	

[error.45]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "pair" in: pair per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1

[error.46]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "per" in: per cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:V

[error.47]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid script (no command is more than 4 characters): "cycle
			
			(L:ROCKET_COUNT2,number) 0 > if{
				2 (>C:VRSTP_SMS:StationIdx, number)
				(C:VRSTP_SMS:StationStoreCount,number) 0 > if{
					1 (>C:VRSTP_SMS:StationFire, bool)
					(L:ROCKET_COUNT2,

[error.48]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.49]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.50]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationFire"

[error.51]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.52]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.53]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationFire"

[error.54]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.55]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStatus"

[error.56]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationCanFire"

[error.57]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.58]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.59]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStatus"

[error.60]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationCanFire"

[error.61]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.62]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.63]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStatus"

[error.64]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationCanFire"

[error.65]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.66]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationIdx"

[error.67]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStatus"

[error.68]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationCanFire"

[error.69]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_SMS:StationStoreCount"

[error.70]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentDecoyType"

[error.71]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserDecoyTypeCountTotal"

[error.72]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentDecoyType"

[error.73]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserDecoyTypeCountTotal"

[error.74]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentDecoyType"

[error.75]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentIndex"

[error.76]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserDecoyDrop"

[error.77]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentDecoyType"

[error.78]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentIndex"

[error.79]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserDecoyDrop"

[error.80]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentDecoyType"

[error.81]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserCurrentIndex"

[error.82]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:DispenserDecoyDrop"

[error.83]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:MaxTracks"

[error.84]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:CMWSEnable"

[error.85]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:ListIndex"

[error.86]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.87]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.88]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.89]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.90]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.91]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Type"

[error.92]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.93]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.94]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:ListIndex"

[error.95]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.96]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.97]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.98]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.99]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.100]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Type"

[error.101]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.102]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.103]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:ListIndex"

[error.104]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.105]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.106]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.107]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.108]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:AzBody"

[error.109]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Type"

[error.110]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.111]
error=Gauge/Script Error
Type: Gauge
Name: SMS
Error: Invalid variable name: "VRSTP_RWR:Priority"

[error.112]
error=file "void(.wav|.ogg)" not found

Re: Cannot Launch Huey - P3D close immediatly

Posted: Sat Jun 01, 2019 1:58 pm
by doodlebug
Was there a windows error report?
Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application

Re: Cannot Launch Huey - P3D close immediatly

Posted: Sat Jun 01, 2019 2:20 pm
by laurent
hum... that was as simple as "Run P3D as admin ..." (which is odd ..)

Re: Cannot Launch Huey - FSX close immediatly

Posted: Sat Jun 01, 2019 8:38 pm
by relain19122
doodlebug wrote: ↑
Sat Jun 01, 2019 1:58 pm
 Was there a windows error report?
Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application
I have the same problem when i want to chose this Hélico UH-1 C or H my FSX close immediately, i have to reboot my FSX and with other rotorcraft or plane i have no problem.

Re: Cannot Launch Huey - P3D close immediatly

Posted: Sat Jun 08, 2019 10:37 pm
by laurent
in my case, i just launched P3D with Admin rights ! no more pb with UH-1H launch.

Re: Cannot Launch Huey - P3D close immediatly

Posted: Tue Jun 11, 2019 11:09 pm
by Dutch
I'm working on trying to reproduce this. I'm using P3D version 4.5 hotfix 1. I freshly downloaded the installer from the version here (V.170803), uninstalled the version I had installed (about the same) then did the installer selecting P3D V4. The installation went without trouble, and the Huey is fully usable.

So there is something different about your system.

At what point does P3D crash? When you select the Huey from the list? Or when you click on OK to start the scenario?

Can you start a free-flight scenario with a default airplane, then select the Huey? Does the cockpit ever appear even momentarily before the crash?

Is there a "UH1.log" file in the root of your P3D folder?

Which version of Windows are you running?

Thanks
Dutch

laurent wrote: ↑
Sat Jun 08, 2019 10:37 pm
 in my case, i just launched P3D with Admin rights ! no more pb with UH-1H launch.
All times are UTC+01:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/