After Installation i have no doors and other parts

[luckylucas]

Dear Milviz support Team

I will try to provide as much information about the way i installed your Huey Redux

1. Before download switched off
Fire wall ,Win defender ,Antivirus ,UCA to never notify see picture Nr.1
2. Downloaded installer Milviz_UH1_C_H_v1.170803 ( see picture Nr.2 with file size info )
3. Run installer as administrator under the same condition as explained in Nr.1
my FSX is installed in E :\FSX see picture Nr.3,4,8

4.Configured doors,crew,cold and dark with MVAMS.exe at the desktop see picture Nr.5,6
5. Run Fsx Huey Redux works fine but ,no gauges ,no doors ,no guns no crew see Picture Nr.9,10,11,12,13,
6. Installer did install following files in these root directory see picture Nr.7


C:\Users\AppData\Local\MVAMS file size 3.7 MB
E :\FSX\Effects\fx_MV_F4_M61 ( Effectfile )
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1_Base file size 205MB
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1C file size 795MB
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1H file size 1.1GB


7. Went thru troubleshooting as explained in your support forum ( Status did not change )

At the very first install I remember by the start of FSX
a popup window telling me something with guges.dll ?
For all sessions or just for this
I could not confirm so I pressed just for this lesson


Questions ?

1. Where or how can I see whether I have all the necessary files ( guns.mdl, doors.mdl model.mdl etc.)
2. Is it maybe necessary to change installation path of MVAMS.exe ( in the exe.xml )
C:\Users\<USERNAME>\AppData\Roaming\Microsoft\FSX\ exe.xml
3. Or do i need to put some .dll files of the MVAMS folder into FSX Mainfolder


will be happy for your help

Screenshot (1).png (310.91 KiB) Viewed 1001 times

Screenshot (2).png (80.99 KiB) Viewed 1001 times

Screenshot (3).png (1.43 MiB) Viewed 1001 times

Screenshot (4).png (1.43 MiB) Viewed 1001 times

Screenshot (5).png (1.17 MiB) Viewed 1001 times

Screenshot (6).png (1.11 MiB) Viewed 1001 times

Screenshot (7).png (927.97 KiB) Viewed 1001 times

Screenshot (8).png (1.45 MiB) Viewed 1001 times

Screenshot (9).png (1.05 MiB) Viewed 1001 times

Screenshot (10).png (1.75 MiB) Viewed 1001 times

[Dutch]

Hi Lucas

Do you have any other Milviz aircraft installed and if so do they work okay?

Another thing to check is in your C:\Users\[your name]\AppData\Local\MVAMS\Modules folder:
Do you see a UH1C.dll and a UH1H.dll file in there?

(You should not have to specify where to install the MVAMS, it only goes in one
place and it knows where.)

Your report indicates that there is no connection between the MVAMS and the Huey model.

So the first question has to be, are you sure you installed the Huey as administrator, and
you are running your simulator as administrator too? And disabled any anti-virus as
recommended? I say because when this happens it's most often a security issue.

If it's not we need to look deeper.

Dutch

Dear Milviz support Team

I will try to provide as much information about the way i installed your Huey Redux

1. Before download switched off
Fire wall ,Win defender ,Antivirus ,UCA to never notify see picture Nr.1
2. Downloaded installer Milviz_UH1_C_H_v1.170803 ( see picture Nr.2 with file size info )
3. Run installer as administrator under the same condition as explained in Nr.1
my FSX is installed in E :\FSX see picture Nr.3,4,8

4.Configured doors,crew,cold and dark with MVAMS.exe at the desktop see picture Nr.5,6
5. Run Fsx Huey Redux works fine but ,no gauges ,no doors ,no guns no crew see Picture Nr.9,10,11,12,13,
6. Installer did install following files in these root directory see picture Nr.7


C:\Users\AppData\Local\MVAMS file size 3.7 MB
E :\FSX\Effects\fx_MV_F4_M61 ( Effectfile )
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1_Base file size 205MB
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1C file size 795MB
E :\FSX\SimObjects\Rotorcraft\MILVIZ_Bell_UH1H file size 1.1GB


7. Went thru troubleshooting as explained in your support forum ( Status did not change )

At the very first install I remember by the start of FSX
a popup window telling me something with guges.dll ?
For all sessions or just for this
I could not confirm so I pressed just for this lesson


Questions ?

1. Where or how can I see whether I have all the necessary files ( guns.mdl, doors.mdl model.mdl etc.)
2. Is it maybe necessary to change installation path of MVAMS.exe ( in the exe.xml )
C:\Users\<USERNAME>\AppData\Roaming\Microsoft\FSX\ exe.xml
3. Or do i need to put some .dll files of the MVAMS folder into FSX Mainfolder


will be happy for your help

Screenshot (1).pngScreenshot (2).pngScreenshot (3).pngScreenshot (4).pngScreenshot (5).pngScreenshot (6).pngScreenshot (7).pngScreenshot (8).pngScreenshot (9).pngScreenshot (10).png

[JonathanBleeker]

Also check if the UH-1C is responding to settings applied to the UH-1H.