Page 1 of 1
Dead Zone in the External sound
Posted: Sun Nov 11, 2018 2:50 am
by superskullmaster
Everything installed perfectly and it flies great, no issues with systems or anything but the problem is that when looking externally at the right hand rear of the aircraft there is no sound, like something is wrong with the sound cones or something. Any ideas?
P3D Pro
Win 7
Re: Dead Zone in the External sound
Posted: Tue Nov 13, 2018 6:23 am
by JonathanBleeker
No idea I’m afraid.
Re: Dead Zone in the External sound
Posted: Tue Nov 13, 2018 9:04 pm
by superskullmaster
Can you at least test on your pc to see if this is a one of event?
Re: Dead Zone in the External sound
Posted: Tue Nov 13, 2018 10:47 pm
by doodlebug
Is this the angle?
Do you have afterburner on?
- F100_sound_cone.png (189.85 KiB) Viewed 16200 times
I can hear the jet sound with AB on everywhere outside the sim.
However, It is strangely quiet with AB off.
The ambient sounds persist in pause; the AB sounds do not.
Re: Dead Zone in the External sound
Posted: Wed Nov 14, 2018 5:34 pm
by superskullmaster
Check from the 4:30 angle. If I can see up the tailpipe I can hear. If not it’s oddly silent.
Re: Dead Zone in the External sound
Posted: Wed Nov 14, 2018 6:00 pm
by JonathanBleeker
Sent a message to our sound guy.
Re: Dead Zone in the External sound
Posted: Wed Nov 14, 2018 6:29 pm
by MikeM
Did you try pressing the "Q" key twice (toggle sound) to see if this fixes the issue?
Mike
Re: Dead Zone in the External sound
Posted: Sun Nov 18, 2018 4:15 am
by superskullmaster
That just muted everything. There is plenty of sound everywhere except for that 4:30 to 5 o’clock position.
Re: Dead Zone in the External sound
Posted: Sun Nov 18, 2018 5:13 am
by doodlebug
Can't replicate. I get sound all the way round 360°
Re: Dead Zone in the External sound
Posted: Fri Dec 07, 2018 3:51 pm
by MikeM
Hi all,
I can confirm that the sound set in the current installer (v1.170615) contains errors which causes "dead spots" when panning the camera around the aircraft in external views.
An update for the F-100D sound set that fixes the issues is available here:
https://www.dropbox.com/s/wbdr8a83yzuqa ... e.zip?dl=0
Just unzip into the "...\SimObjects\Airplanes\Milviz F-100D\sound.MV_F100" folder and overwrite when prompted.
Hopefully this update will be included in a future installer.
Enjoy!
Mike
Re: Dead Zone in the External sound
Posted: Thu Dec 27, 2018 9:21 pm
by superskullmaster
MikeM wrote: ↑Fri Dec 07, 2018 3:51 pm
Hi all,
I can confirm that the sound set in the current installer (v1.170615) contains errors which causes "dead spots" when panning the camera around the aircraft in external views.
An update for the F-100D sound set that fixes the issues is available here:
https://www.dropbox.com/s/wbdr8a83yzuqa ... e.zip?dl=0
Just unzip into the "...\SimObjects\Airplanes\Milviz F-100D\sound.MV_F100" folder and overwrite when prompted.
Hopefully this update will be included in a future installer.
Enjoy!
Mike
Thank you for being honest. I know some people here shy away from issues or ignore them. Everything works great now.