Elevator Trim does not work for Adv T-38A Prepar3d 3.4

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Thu Feb 23, 2017 7:06 pm

The Elevator Trim does not work in Prepar3d 3.4 when bound to the Elevator/Aileron trim (POV hat) Hat switch 1. Aileron trim works fine. All trim functions work on other aircraft in Prepar3d. It does work when assigned to other joystick keys, and with the default keyboard bindings. I installed the standard version of the T-38A to Prepar3D with no control changes made, the elevator trim works fine on the standard version. The trim works as advertised on all the other aircraft in Prepar3D. Anybody care to venture a guess as to the solution to this problem, I went so far as to reset my Win 10 OS and reinstalled Prepar3D, and made sure the legacy versions of simconnect were installed. All programs and installers were downloaded and installed with the anti-virus off and run "As Administrator" All programs, drivers, and installers are the most recent ones available. :?

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by Krazycolin » Thu Feb 23, 2017 7:35 pm

We're aware of this but have no workaround.

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Fri Jun 02, 2017 2:42 am

So......Are we working on this? Getting tired of holding the stick back.

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by Krazycolin » Fri Jun 02, 2017 2:45 am

Sorry but we have no workaround for this. You will have to use a different method that tying it to your hat.

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Fri Jun 02, 2017 1:57 pm

Disappointing :(

Alvaro
Posts: 193
Joined: Mon Dec 15, 2014 2:25 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by Alvaro » Fri Jun 02, 2017 5:52 pm

kdrum60 wrote:Disappointing :(
There is a major T-38A ADV update almost ready. It will include a long list of fixes and improvements as well as some (not all) of the so far requested features.

Right now, the P3D v4 (64 bit) migration of MV´s products is our priority and your request is a pushed at the end of the T38A ADV´s list; which actually is not on the top of tops...

This said, I will look into it, but again, no promises. The aircraft can be perfectly trimmed as is and in no way yours is a critical issue in our product, rather a request from a single user.

At this moment we need to make our products work as much good in 64 bit as they did in 32bit...or even better!!, this achieved....we´ll see. ;)

Thanks

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Sun Jun 04, 2017 12:22 am

Thank you for the update :)

mcdonaldgt5
Posts: 3
Joined: Sat May 13, 2017 5:40 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by mcdonaldgt5 » Sun Jun 04, 2017 3:32 am

Glad to hear you have a T38 update in work. This is one awesome trainer. Anything you can do to improve will be appreciated. Tom McDonald

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Tue Dec 19, 2017 1:33 pm

Is this still in-work? My thumb automatically tries to trim using the POV switch, probably because the other aircraft I fly use it for trim.

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by doodlebug » Tue Dec 19, 2017 1:38 pm

Since Alvaro's post the update has been released: [3.170726] and a subsequent update via the MVAMS utility [3.171108]
Which version you are using?

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Tue Dec 19, 2017 4:23 pm

Yes it is.

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Tue Dec 19, 2017 6:04 pm

In addition, the Take off trim does not work with any flap settings. The button will not depress nor will the green light come on.

Alvaro
Posts: 193
Joined: Mon Dec 15, 2014 2:25 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by Alvaro » Tue Dec 19, 2017 9:12 pm

kdrum60 wrote:In addition, the Take off trim does not work with any flap settings. The button will not depress nor will the green light come on.
Are you running P3D v4 as admin?.

(Unfortunately the POV switch will never trim the T38A ADV....sorry :( )

kdrum60
Posts: 38
Joined: Tue Jan 06, 2015 2:09 am
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by kdrum60 » Wed Dec 20, 2017 12:51 am

Alvaro wrote:
kdrum60 wrote:In addition, the Take off trim does not work with any flap settings. The button will not depress nor will the green light come on.
Are you running P3D v4 as admin?.
Yes I am.

I later discovered that if you hover the cursor over the TOT button and scroll down, the TOT button will depress (and stay depressed), TOT will activate, and the green light will come on. Right mouse button will release the TOT button. :?

Alvaro
Posts: 193
Joined: Mon Dec 15, 2014 2:25 pm
Re: Elevator Trim does not work for Adv T-38A Prepar3d 3.4

Post by Alvaro » Wed Dec 20, 2017 7:46 pm

Alvaro wrote: (Unfortunately the POV switch will never trim the T38A ADV....sorry :( )
*EDIT*

the POV switch WILL trim the T38A ADV....;)

(in the next release, along with some additional fixes and features)


Locked

Return to “Northrop T-38A Advanced Support Forum”