Holding Pattern

Locked
dc_exo_1
Posts: 3
Joined: Mon Aug 03, 2020 1:26 am
Holding Pattern

Post by dc_exo_1 » Fri Aug 28, 2020 6:08 pm

Hi ,

I was wondering if is it possible to set up a holding pattern manually to a waypoint , like the OBS on the Garmin ? I know how he work with the FMS but i want to practise .


Thank you

Victory103
Posts: 106
Joined: Sat Jul 23, 2011 7:24 pm
Location: TX, USA
Re: Holding Pattern

Post by Victory103 » Sun Aug 30, 2020 10:24 pm

1. To hold at present position:
a. Press the HOLD key.
b. Select PPS.
c. Define the elements of the holding procedure on the HOLD page.
2. To hold at a waypoint on the flight plan:
a. Press the HOLD key.
b. Enter the holding point in the boxes (ııııı), or select NEW HOLD if there is already a holding
point defined (i.e. missed approach holding) in the flight plan
c. Enter the ID of the holding point (if necessary).
d. Define the elements of the holding procedure on the HOLD page.
3. To exit holding, press EXIT HOLD on the LEGS or HOLD page. The FMS will sequence to the next
waypoint in the flight plan or stay on current heading if there are no more waypoints or if there is a
discontinuity. Or you can go DIRECT to the next waypoint to exit the holding pattern (see next step).


Locked

Return to “K.A.350 Support Forum”