HF2 1.0.6 new axis setup option - issue
-
FinnJacobsen
- Posts: 87
- Joined: Tue Apr 17, 2018 1:03 pm
HF2 1.0.6 new axis setup option - issue
I´m using a CH-Product Throttle Quadrant. together with FSUIPC.
Power, Prop and conditioner levers (Throttle, Prop, mixture) are all setup with no calibration and set as direct.
I have setup the various axis' with MWAMS, but has some issues.
1. The Power lever detends doesn´t seem to be saved, at least the coloured lines jumps back to their origin.
2. Sometimes the right Power lever jumps a bit up and down with a 1 sec interval - reloading the aircraft makes that go away.
3. The left Propeller lever jumps from full forward to feather, sometimes it goes away for a while reloading the aircraft. This is not caused by axis spikes, cause unassigning any axis action for the left prop lever doesn´t help.
I also tried to unassign the axis' for both propeller levers and then assign the left hardware axis as "Propellers set", so that this axis controlled both propeller levers in the sim. While the left prop lever still jumped, the right prop lever was working fine - which rules out the hardware lever to be faulty.
Apart from the occasional jumping of the right Power lever, the Power and Condition levers works Ok.
Main problem for me right now is the left Propeller lever.
I have serveral twin engined aircraft that all work without any hickups, so I rule out that my CH-Product THQ is the culprit.
So something software (simconnect maybe) might cause the issues I see.
*****EDIT****
Right now I got it working, but setting up the axis' are tedious.
*******
Power, Prop and conditioner levers (Throttle, Prop, mixture) are all setup with no calibration and set as direct.
I have setup the various axis' with MWAMS, but has some issues.
1. The Power lever detends doesn´t seem to be saved, at least the coloured lines jumps back to their origin.
2. Sometimes the right Power lever jumps a bit up and down with a 1 sec interval - reloading the aircraft makes that go away.
3. The left Propeller lever jumps from full forward to feather, sometimes it goes away for a while reloading the aircraft. This is not caused by axis spikes, cause unassigning any axis action for the left prop lever doesn´t help.
I also tried to unassign the axis' for both propeller levers and then assign the left hardware axis as "Propellers set", so that this axis controlled both propeller levers in the sim. While the left prop lever still jumped, the right prop lever was working fine - which rules out the hardware lever to be faulty.
Apart from the occasional jumping of the right Power lever, the Power and Condition levers works Ok.
Main problem for me right now is the left Propeller lever.
I have serveral twin engined aircraft that all work without any hickups, so I rule out that my CH-Product THQ is the culprit.
So something software (simconnect maybe) might cause the issues I see.
*****EDIT****
Right now I got it working, but setting up the axis' are tedious.
*******