Blackbird Sims / Milviz Forum Archive

Posted: **Fri Jan 24, 2020 4:50 pm**

Saitek Throttle set. Assigned in FSUIPC a KA350 profile.
Can assign Throttle and Condition axis.
Unable to get Properller axis to assign in FSUIPC

Posted: **Fri Jan 24, 2020 5:02 pm**

Make sure that all levers are assigned as AXIS with no calibration.
Should look like this in the FSUIPC.ini

4=2Z,256,F,66420,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE1_SET }-
5=2R,256,F,66424,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER2_SET }-
6=2U,256,F,66423,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE2_SET }-
7=2V,256,F,66421,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER1_SET }-
8=2S,256,F,0,66422,0,0,*-1 -{ TO SIM: AXIS_MIXTURE1_SET }-
9=2T,256,F,66425,0,0,0,*-1 -{ TO SIM: AXIS_MIXTURE2_SET }-

Posted: **Fri Jan 24, 2020 5:12 pm**

metzgergva wrote: ↑
Fri Jan 24, 2020 5:02 pm
Make sure that all levers are assigned as AXIS with no calibration.
Should look like this in the FSUIPC.ini

4=2Z,256,F,66420,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE1_SET }-
5=2R,256,F,66424,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER2_SET }-
6=2U,256,F,66423,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE2_SET }-
7=2V,256,F,66421,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER1_SET }-
8=2S,256,F,0,66422,0,0,*-1 -{ TO SIM: AXIS_MIXTURE1_SET }-
9=2T,256,F,66425,0,0,0,*-1 -{ TO SIM: AXIS_MIXTURE2_SET }-

I use one axis for both. Throttles and Mixture is working.

0=0Y,256,F,65767,0,0,0 -{ TO SIM: PROP_PITCH_SET }-
1=0Z,256,F,66292,0,0,0 -{ TO SIM: AXIS_MIXTURE_SET }-

Posted: **Fri Jan 24, 2020 5:34 pm**

metzgergva wrote: ↑
Fri Jan 24, 2020 5:02 pm
Make sure that all levers are assigned as AXIS with no calibration.
Should look like this in the FSUIPC.ini

4=2Z,256,F,66420,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE1_SET }-
5=2R,256,F,66424,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER2_SET }-
6=2U,256,F,66423,0,0,0,*-1 -{ TO SIM: AXIS_THROTTLE2_SET }-
7=2V,256,F,66421,0,0,0,*-1 -{ TO SIM: AXIS_PROPELLER1_SET }-
8=2S,256,F,0,66422,0,0,*-1 -{ TO SIM: AXIS_MIXTURE1_SET }-
9=2T,256,F,66425,0,0,0,*-1 -{ TO SIM: AXIS_MIXTURE2_SET }-

I used the wrong axis name. Apologies! Fixed and prop assigned fine here.

Blackbird Sims / Milviz Forum Archive

Cannot assign Propeller pitch axis in FSUIPC

Cannot assign Propeller pitch axis in FSUIPC

Re: Cannot assign Propeller pitch axis in FSUIPC

Re: Cannot assign Propeller pitch axis in FSUIPC

Re: Cannot assign Propeller pitch axis in FSUIPC