LINDA is on its way ...

Locked
transfer
LINDA is on its way ...

Post by transfer » Mon Dec 23, 2019 7:26 am

Hello all,

thanks to the support of MilViz, there's already a LINDA module in work.


For all, which do not know about LINDA: it is a freeware application (however based on registered/paid FSUIPC) which lets you easily assign nearly all possible switches and knobs to your HID hardware and VRInsight MCP Combos.
(Axes are not supported)

I make good progress, however there are some difficulties and Xmas is tomorrow, so I will be some days off of course.


Think there will be an release of a first version before end of 2019 hopefully

Have fun!

transfer
Re: LINDA is on its way ...

Post by transfer » Mon Dec 23, 2019 7:28 am

@devs or forum moderators


I was accidently added with a new account to this KA350 forum
I have sent Oisin already a mail to change it to my normal account here (Nickname Guenseli)

So, the above news about LINDA is from "Guenseli"

Klaus
Posts: 10
Joined: Sat Jul 07, 2018 6:27 pm
Re: LINDA is on its way ...

Post by Klaus » Mon Dec 23, 2019 9:49 am

Glad to hear! I use your modules for nearly all of my aircraft!
Wish you nice christmas days!

Thank you

hasse.w
Posts: 17
Joined: Sat Dec 21, 2019 11:21 pm
Re: LINDA is on its way ...

Post by hasse.w » Mon Dec 23, 2019 3:59 pm

locking forward to 350i profile
start drawing a mcp for the 350 , had done one for the CRJ 550-1000 and its very similar
encoders with center push i have 5 spare , most order dual encoders wirt push
https://www.dropbox.com/s/rjllbpv8uxyn6 ... 2.jpg?dl=0

Guenseli
Posts: 45
Joined: Thu Mar 27, 2014 7:48 am
Re: LINDA is beta ...

Post by Guenseli » Sun Dec 29, 2019 9:00 am

A first beta of the MilViz LINDA module is ready so there you could start with it.



https://www.avsim.com/forums/topic/5686 ... n-10-beta/

It does not contain all switches and is not meant to be complete. But most of the important ones are in, already (about 200 already). But I wanted to share it already, so that you could start with it.

Expect a new version not earlier then the coming SP of MilViz for the B350, where they hopefully fix a lot of bugs then.


These are the current implemented functions.

Code: Select all

AUTOPILOT BUTTONS
=================


FD L

B350i FD L on
B350i FD L off
B350i FD L toggle

AP BUTTONS

B350i VS press
B350i VNAV press
B350i FLC press
B350i NAV press
B350i HDG press
B350i APPR press
B350i ALT press
B350i YD press
B350i CPL press
B350i AP press

YD / AP DISC

B350i YDAPDisc on
B350i YDAPDisc off
B350i YDAPDisc toggle

FD R

B350i FD R on
B350i FD R off
B350i FD R toggle

FD BOTH

B350i FD both on
B350i FD both off
B350i FD both toggle

AUTOPILOT ROTARIES
==================


VS

B350i AP VS inc
B350i AP VS dec

SPD

B350i AP SPD Bug inc
B350i AP SPD Bug dec

HDG

B350i AP HDG Bug inc
B350i AP HDG Bug fastinc
B350i AP HDG Bug dec
B350i AP HDG Bug fastdec
B350i AP HDG Bug sync

ALT

B350i AP ALT Bug inc
B350i AP ALT Bug fastinc
B350i AP ALT Bug dec
B350i AP ALT Bug fastdec

YOKE CAPT
=========

B350i CYoke Disc

CAPT SIDE DISPLAYS ..................
=====================================


DISPLAY CONTROL PANEL L
=======================

B350i Refs press
B350i NAVBRG press
B350i Radar press

BARO KNOB

B350i Baro STD

MENU DATA KNOB L

B350i Menu inc
B350i Menu dec
B350i Data inc
B350i Data dec
B350i Menu Data toggle
B350i MDKnob inc
B350i MDKnob dec

TILT RANGE KNOB L

B350i Tilt inc
B350i Tilt dec
B350i Rnge inc
B350i Rnge dec
B350i Tilt Rnge toggle
B350i TRKnob inc
B350i TRKnob dec

DISPLAY PFD L KEYS
==================

B350i PFD L LSK 1
B350i PFD L LSK 2
B350i PFD L LSK 3
B350i PFD L LSK 4
B350i PFD L RSK 1
B350i PFD L RSK 2
B350i PFD L RSK 3
B350i PFD L RSK 4

DISPLAY MFD L KEYS
==================

B350i MFD L LSK 1
B350i MFD L LSK 2
B350i MFD L LSK 3
B350i MFD L LSK 4
B350i MFD L RSK 1
B350i MFD L RSK 2
B350i MFD L RSK 3
B350i MFD L RSK 4

DISPLAY BRIGHTNESS
==================


PILOT DISPLAY

B350i PilotDisplay show
B350i PilotDisplay inc
B350i PilotDisplay dec
B350i PilotDisplay off
B350i PilotDisplay 50
B350i PilotDisplay 100
B350i PilotDisplay toggle

COPILOT DISPLAY

B350i CopilotDisplay show
B350i CopilotDisplay inc
B350i CopilotDisplay dec
B350i CopilotDisplay off
B350i CopilotDisplay 50
B350i CopilotDisplay 100
B350i CopilotDisplay toggle

ALL DISPLAYS BRIGHTNESS

B350i AllDisplay inc
B350i AllDisplay dec
B350i AllDisplay off
B350i AllDisplay 50
B350i AllDisplay 100
B350i AllDisplay toggle

ELECTRIC
========

B350i BatterySwitch on
B350i BatterySwitch off
B350i BatterySwitch toggle

GENERATORS

B350i L Generator on
B350i L Generator off
B350i L Generator reset
B350i R Generator on
B350i R Generator off
B350i R Generator reset
B350i Both Generators on
B350i Both Generators off

AVIONICS

B350i MAIN Switch Avionics on
B350i MAIN Switch Avionics off
B350i MAIN Switch Avionics toggle

ESIS

B350i ESIS Switch on
B350i ESIS Switch off
B350i ESIS Switch toggle

EXT PWR AND GPU

KA350i GPU on
KA350i GPU off
KA350i GPU toggle
B350i ExtPower on
B350i ExtPower off
B350i ExtPower toggle

ENGINE START
============


STARTER LEFT

B350i StarterLeft on
B350i StarterLeft off
B350i StarterLeft only

STARTER RIGHT

B350i StarterRight on
B350i StarterRight off
B350i StarterRight only

AUTOFEATHER
===========

B350i AutoFeather arm
B350i AutoFeather off
B350i AutoFeather toggle

ICE PROTECTION
==============


PITOT

B350i Left PitotHeat on
B350i Left PitotHeat off
B350i Left PitotHeat toggle
B350i Right PitotHeat on
B350i Right PitotHeat off
B350i Right PitotHeat toggle
B350i Both PitotHeat on
B350i Both PitotHeat off
B350i Both PitotHeat toggle

INT. FLOOD LIGHTS
=================


PILOT OVERHEAD

B350i PilotOvhFlood show
B350i PilotOvhFlood inc
B350i PilotOvhFlood dec
B350i PilotOvhFlood off
B350i PilotOvhFlood 50
B350i PilotOvhFlood 100
B350i PilotOvhFlood toggle

INSTRUMENT INDIREKT

B350i InstIndLights show
B350i InstIndLights inc
B350i InstIndLights dec
B350i InstIndLights off
B350i InstIndLights 50
B350i InstIndLights 100
B350i InstIndLights toggle

COPILOT OVERHEAD

B350i CopilotOvhFlood show
B350i CopilotOvhFlood inc
B350i CopilotOvhFlood dec
B350i CopilotOvhFlood off
B350i CopilotOvhFlood 50
B350i CopilotOvhFlood 100
B350i CopilotOvhFlood toggle

ALL FLOODS

B350i AllFloodLights inc
B350i AllFloodLights dec
B350i AllFloodLights off
B350i AllFloodLights 50
B350i AllFloodLights 100
B350i AllFloodLights toggle

PANEL LIGHTS
============

B350i MasterPanelLights on
B350i MasterPanelLights off
B350i MasterPanelLights toggle

PILOT INSTR PANEL

B350i PilotInstPanel show
B350i PilotInstPanel inc
B350i PilotInstPanel dec
B350i PilotInstPanel off
B350i PilotInstPanel 50
B350i PilotInstPanel 100
B350i PilotInstPanel toggle

OVHD INST PANEL LIGHTS

B350i OvhPedAndSubPanel show
B350i OvhPedAndSubPanel inc
B350i OvhPedAndSubPanel dec
B350i OvhPedAndSubPanel off
B350i OvhPedAndSubPanel 50
B350i OvhPedAndSubPanel 100
B350i OvhPedAndSubPanel toggle

SIDE PANEL LIGHTS

B350i SidePanel show
B350i SidePanel inc
B350i SidePanel dec
B350i SidePanel off
B350i SidePanel 50
B350i SidePanel 100
B350i SidePanel toggle

COPILOT INSTR PANEL

B350i CopilotInstPanel show
B350i CopilotInstPanel inc
B350i CopilotInstPanel dec
B350i CopilotInstPanel off
B350i CopilotInstPanel 50
B350i CopilotInstPanel 100
B350i CopilotInstPanel toggle

ALL PANEL LIGHTS

B350i PanelLights inc
B350i PanelLights dec
B350i PanelLights off
B350i PanelLights 50
B350i PanelLights 100
B350i PanelLights toggle

EXTERNAL LIGHTS
===============


LANDING LIGHTS

B350i switch landing light left on
B350i switch landing light left off
B350i switch landing light left toggle
B350i switch landing light right on
B350i switch landing light right off
B350i switch landing light right toggle
B350i switch landing light both on
B350i switch landing light both off
B350i switch landing light both toggle

TAXI LIGHTS

B350i TaxiLights on
B350i TaxiLights off
B350i TaxiLights toggle

ICE LIGHT

B350i IceLights on
B350i IceLights off
B350i IceLights toggle

NAV

B350i NavigationLights on
B350i NavigationLights off
B350i NavigationLights toggle

RECOG

B350i RecognitionLights on
B350i RecognitionLights off
B350i RecognitionLights toggle

BCN

B350i BeaconLights on
B350i BeaconLights off
B350i BeaconLights toggle

STRB

B350i StrobeLights on
B350i StrobeLights off
B350i StrobeLights toggle

TAIL FLOOD

B350i TailFloodLight on
B350i TailFloodLight off
B350i TailFloodLight toggle

MASTER WARN & CAUTION
=====================

B350i MasterCaution press
B350i MasterWarn press
B350i Master Both press

CCP
===


JOYSTICK

B350i CCP up
B350i CCP dn
B350i CCP left
B350i CCP right

CCP SELECTOR

B350i CCP enter
B350i CCP Select Menu dec
B350i CCP Select Menu inc

SAS443
Posts: 42
Joined: Sun Dec 22, 2019 12:31 pm
Re: LINDA is on its way ...

Post by SAS443 » Sun Dec 29, 2019 9:23 am

Dear Guenseli, I am so grateful of your work and dedication to the FS community. Big thanks for this!
For years I have used Linda and various profiles and for those who are not familiar with LINDA, it is one of those utilities you sorely miss when you can't use it (when no profile is available) 8-)

User avatar
johnh
Posts: 50
Joined: Mon Sep 16, 2019 1:19 pm
Re: LINDA is on its way ...

Post by johnh » Sun Dec 29, 2019 9:57 am

Guenseli, thanks for your work on getting the Linda profile ready. I use Spad.Next and already have a number of buttons/switches/dials programmed. However, I am trying to derive my LVAR/EventID's from your work for those that I have missing (mainly AP Panel). To this end can I ask if these values are LVAR's or Simconnect values? If LVAR's I don't seem to be able to call them up? e.g. You list "B350i AP HDG Bug inc" and I can only find "LVAR:B350i_AP_HDGBug" or in SimConnect "HEADING_BUG_INC".

Are you able to assist/clarify in some way?

Guenseli
Posts: 45
Joined: Thu Mar 27, 2014 7:48 am
Re: LINDA is on its way ...

Post by Guenseli » Sun Dec 29, 2019 8:21 pm

thanks SAS for your kind words!


@John

I do not know how it work in SPAD ...

I use Lvars, but they are combined in functions used in LUA scripts.


The complete function for the HDG Bug ( as example) is:

function B350i_AP_HDG_Bug_inc ()
ipc.writeLvar("B350i_AP_APSelFastInc", 0)
ipc.writeLvar("AP_EVENT", 69834)
ipc.writeLvar("XMLSND2", 1)
B350i_HDGBugRot_cw ()
B350i_Displ_FLT_info ()
ipc.writeLvar("B350i_AP_APSelFastInc", 0)
end


But this contains Knob animation in VC, Sounds and the ability to rotate it faster, when you rotate the knob faster.
The Lvar you need just to set HDG is "AP_EVENT", 69834
But then, you just get the HDG set, no sound and no animation

Similar to this do other AP functions work

User avatar
johnh
Posts: 50
Joined: Mon Sep 16, 2019 1:19 pm
Re: LINDA is on its way ...

Post by johnh » Sun Dec 29, 2019 9:27 pm

Thanks very much Guenseli! I have now got it working partially and wonder if I can ask a couple more questions to clarify some issues?

1. I assume the AP_Event, 69834 is sending a Mouse Wheel Up/Down command? If so, can you let me know the other value?
2. XMLSND2, 1 - is this the sound event?
3. Where does the B350i_HDGBugRot_cw Event come from? It is not listed in my LVAR (as expected) but nor can I find it anywhere else (Simconnect, FSUIPC, Local Variables) I assume this is the Event that triggers the animation?

Your assistance is greatly appreciated
Last edited by johnh on Sun Dec 29, 2019 9:31 pm, edited 1 time in total.

User avatar
johnh
Posts: 50
Joined: Mon Sep 16, 2019 1:19 pm
Re: LINDA is on its way ...

Post by johnh » Sun Dec 29, 2019 9:30 pm

Guenseli, sorry I should have played around a LOT more before asking questions. Please disregard Question 1. I found the answer 69835!

Guenseli
Posts: 45
Joined: Thu Mar 27, 2014 7:48 am
Re: LINDA is on its way ...

Post by Guenseli » Mon Dec 30, 2019 12:08 am

johnh wrote:
Sun Dec 29, 2019 9:30 pm
I found the answer 69835!


NO!!!!
That answer is wrong!!!

The right answer is 42!


:lol:

hasse.w
Posts: 17
Joined: Sat Dec 21, 2019 11:21 pm
Re: LINDA is on its way ...

Post by hasse.w » Sat Jan 04, 2020 12:23 pm

Thanks.
Linda ++++ , Like this bird started to build a FGP its working with Linda.
had some work with the text and some small mod on the knobs ,
https://www.dropbox.com/s/ra2hsvwnmzxan ... U.jpg?dl=0
Last edited by hasse.w on Sat Jan 04, 2020 8:08 pm, edited 1 time in total.

Torkermax
Posts: 26
Joined: Thu Nov 20, 2014 2:08 am
Re: LINDA is on its way ...

Post by Torkermax » Sat Jan 04, 2020 3:00 pm

hasse.w wrote:
Sat Jan 04, 2020 12:23 pm
Thanks.
Linda ++++ , Like this bird started to build a FCU its working with Linda.
had some work with the text and some small mod on the knobs ,
https://www.dropbox.com/s/ra2hsvwnmzxan ... U.jpg?dl=0
Built one very similar to that few years back using Leo Bodnar board. About time t6o upgrade the encoders. Where did you get yours if I may ask?

User avatar
johnh
Posts: 50
Joined: Mon Sep 16, 2019 1:19 pm
Re: LINDA is on its way ...

Post by johnh » Thu Jan 09, 2020 9:06 pm

Thanks for you r LINDA profile! I managed to convert the parts I wanted into SPAD.next and will start a new topic for that!

User avatar
johnh
Posts: 50
Joined: Mon Sep 16, 2019 1:19 pm
Re: LINDA is on its way ...

Post by johnh » Sat Jan 11, 2020 11:10 pm

Sorry, couldn't reply to your last PM RTU = Radio Tuning Unit


Locked

Return to “K.A.350 Support Forum”