Page 1 of 3
KA350i Version 1.0.0
Posted: Sat Dec 21, 2019 8:41 pm
by Turbofandude
Testing and Feedback Team,
It is with great pleasure that we announce the release of version 1.0 of the KA350i. It can be downloaded here: SEE HOTFIX POST -
viewtopic.php?f=105&t=11394
This version marks the end of years of development, testing, and iteration. It is the KA350i that we wanted the world to have and it is time for it to have it. Thank you all VERY much for your feedback, support, and effort throughout the months (and years) that helped get us where we are.
From here, we anticipate the need for a service pack to smooth any issues found post-release and potentially expand the product. We have no official dates or feature lists for any subsequent updates at this time.
If you do find any issues, please continue to report them via Mantis and we will do our best to address them. As always, you will need a serial key to install it. If you do not yet have one, please contact myself or Oisín (doodlebug).
Changes from RC1
FMS Changes
-Fixed an MFD ADV PREV/NEXT related CTD
-Fixed ability for leg data to show as -inf(nan)
-Updated FMS-3000 popup texture
-Fixed a bug preventing certain elements of the 2D FMS popup frame from appearing
Systems
-Various fixes
PL21
-Various fixes
Visual
-Various fixes
On behalf of the entire KA350i team, thank you all and may your skies be smooth!
Re: KA350i Version 1.0.0
Posted: Sat Dec 21, 2019 9:03 pm
by Barnes
Thank-you Collin and all at Milviz. Best of luck with the release!
Regards,
Dave
Re: KA350i Version 1.0.0
Posted: Sat Dec 21, 2019 9:55 pm
by giorgio759
Congratulations! I hope she does very well and rewards all your efforts!
Re: KA350i Version 1.0.0
Posted: Sat Dec 21, 2019 10:10 pm
by macVsog
Congratulations and TY for all the hard work put into this. Wish everyone a Merry Christmas and Happy New Years!
Re: KA350i Version 1.0.0
Posted: Sat Dec 21, 2019 10:44 pm
by AVQ05
Thank you Guy's. Wish everyone a Merry Christmas and Happy New Years!
Regards,
Pierre
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 12:42 am
by Torkermax
Congratulations.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 3:36 am
by waleed
Thank you all for the great work and for your persistence.
Great work.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 3:54 am
by johnh
Not sure if this is just me but my throttles are not moving (Saitek and Spad.NEXT) Power increases but then drops back to Idle RPM even though throttles are fully advanced
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 5:12 am
by Heronjr
johnh wrote: ↑Sun Dec 22, 2019 3:54 am
Not sure if this is just me but my throttles are not moving (Saitek and Spad.NEXT) Power increases but then drops back to Idle RPM even though throttles are fully advanced
Harry, maybe you should go to Spad and reapply the Aircraft Assignments, because this version renewed the models (aircraft.cfg). In Spad interface, select the profile you use for the KA350i, go to Aircraft Assignments and remove the currently assigned aircraft, and then reassign the new models.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 5:15 am
by Heronjr
Thanks for the job.
The yokes' chrono light is now always on. It was OK on RC1, Not a problem, guys.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 6:13 am
by Rossco
johnh wrote: ↑Sun Dec 22, 2019 3:54 am
Not sure if this is just me but my throttles are not moving (Saitek and Spad.NEXT) Power increases but then drops back to Idle RPM even though throttles are fully advanced
Not just you Harry.
Iv'e had this issue all along since the first Beta & it's still not resolved for me. Tried P3D default settings, FSUIPC with & without controls turned on (my usual setup) & also SPAD.neXt all to no avail. Somewhat frustrating!!
Have asked a number of times why is this aircraft so different to all others I've ever had including their own Turbo Otter which works flawlessly for me & am yet to get an explanation.
Not sure why this is happening but until I can resolve it this aircraft unfortunately will remain hangared.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 6:43 am
by johnh
Heronjr wrote: ↑Sun Dec 22, 2019 5:12 am
johnh wrote: ↑Sun Dec 22, 2019 3:54 am
Not sure if this is just me but my throttles are not moving (Saitek and Spad.NEXT) Power increases but then drops back to Idle RPM even though throttles are fully advanced
Harry, maybe you should go to Spad and reapply the Aircraft Assignments, because this version renewed the models (aircraft.cfg). In Spad interface, select the profile you use for the KA350i, go to Aircraft Assignments and remove the currently assigned aircraft, and then reassign the new models.
Hi Heron, yes I have done this for each version and it is a bit of a drag having to do it each time but it needs to be done. I should add that the Propeller and Condition levers work just fine (I have two Saitek Throttle Quadrants). This includes the left Propeller Lever which is on the same TQ as the two Power Levers.
I am away for work for the next couple of days but will follow this with interest
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 6:45 am
by johnh
Rossco wrote: ↑Sun Dec 22, 2019 6:13 am
johnh wrote: ↑Sun Dec 22, 2019 3:54 am
Not sure if this is just me but my throttles are not moving (Saitek and Spad.NEXT) Power increases but then drops back to Idle RPM even though throttles are fully advanced
Not just you Harry.
Iv'e had this issue all along since the first Beta & it's still not resolved for me. Tried P3D default settings, FSUIPC with & without controls turned on (my usual setup) & also SPAD.neXt all to no avail. Somewhat frustrating!!
Have asked a number of times why is this aircraft so different to all others I've ever had including their own Turbo Otter which works flawlessly for me & am yet to get an explanation.
Not sure why this is happening but until I can resolve it this aircraft unfortunately will remain hangared.
Interesting Rossco! Do you have two TQ's as well? If so, which one is having the issue, the one connected to the Yoke or the USB?
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 6:56 am
by Rossco
Hi Harry,
I have a PFC USB throttle quadrant.
Re: KA350i Version 1.0.0
Posted: Sun Dec 22, 2019 7:03 am
by johnh
Well - there goes that theory
