Page 1 of 2
King Air 350i Build 0.0.34
Posted: Fri Sep 20, 2019 10:17 pm
by Turbofandude
Folks,
Build 0.0.0.33 is available here:
https://milviz.com/Online_products/BETA ... 190920.zip. As always, you will need a serial key to install and use the product. Oisín (doodlebug) or I can handle getting your keys. Please message one of us and we'll get you set up.
We are now only a few builds away from an official beta. We will be heavily reviewing and fixing Mantis items once we feature complete.
FAQ
Q: I can't install it without a serial key.
A: Message me or Oisín (doodlebug) for a serial key.
Q: I get SUPER low FPS.
A: Try disabling "transparent surface rendering" in the MVAMS.
Q: Night lighting isn't working
A: Correct. This build does not have night lighting as we are testing/verifying model/texture related fixes.
Changes:
FMS IMPROVEMENTS
-Fixed ability to modify the TO leg
-Fixed/improved duplicate waypoint detection and removal
OTHER CHANGES
-Model/texture improvements
-Various systems improvements
-Various FDE improvements
-FMS text improvements
Re: King Air 350i Build 0.0.34
Posted: Sun Sep 22, 2019 8:40 pm
by DuvalM
Hi,
Do I need to remove the previous beta to install a new one, or can I just install over it ?
Thanks
Re: King Air 350i Build 0.0.34
Posted: Sun Sep 22, 2019 8:45 pm
by Turbofandude
Usually, you can install over (it'll upgrade).
Re: King Air 350i Build 0.0.34
Posted: Sun Sep 22, 2019 8:55 pm
by DuvalM
Turbofandude wrote: ↑Sun Sep 22, 2019 8:45 pm
Usually, you can install over (it'll upgrade).
Thanks for the super fast answer.
Re: King Air 350i Build 0.0.34
Posted: Sun Sep 22, 2019 10:47 pm
by Heronjr
Hi,
Here, still crashing on P3D V4.5. If a default aircraft is pre-loaded, I receive a message "the product is either not activated...".
Regards
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 8:43 am
by DuvalM
Hi,
Also should I keep it in the P3D folder, or can it be installed in another one ?
Thanks
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 10:29 am
by doodlebug
It must be kept in the P3D folder.
We are looking into various crashes and their causes. Could you please list your system details in your signature. It may help us to track down where clashes may be occurring.
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 4:35 pm
by DuvalM
Sure thing for the signature.
Just loaded the plane and got this display problem when I switch the battery ON.

- 2019-9-23_17-32-19-174.jpg (373.66 KiB) Viewed 2619 times
EDIT: The same happens when I switch the emergency light button even without battery ON.
EDIT: The green color is the emergency lights. I had BAT BUS to NORM. This behavior stops when it is set to EMER OFF
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 4:57 pm
by DuvalM
No very important but Texture.N831KA has N70EU skin.
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 5:00 pm
by DuvalM
Colin,
Is there a Manual or Checklist somewhere ?
Thanks
Re: King Air 350i Build 0.0.34
Posted: Mon Sep 23, 2019 5:42 pm
by doodlebug
The manual is not finished yet. If you have access to a real life 350i manual, systems should work in the same way
Re: King Air 350i Build 0.0.34
Posted: Tue Sep 24, 2019 4:29 am
by Heronjr
Heronjr wrote: ↑Sun Sep 22, 2019 10:47 pm
Hi,
Here, still crashing on P3D V4.5. If a default aircraft is pre-loaded, I receive a message "the product is either not activated...".
Regards
I am replying my own post above. The solution I found was uninstalling REX-Milviz Advantage Weather Radar (anyway, it was not working in the last P3D) and I could finally fly the KA350i from Cold & Dark - T/O - Landing. I've heard somewhere there is a DLL installed by the Weather Radar which performs the chaos with the KA.
An extremely good aircraft to manually fly, if not the best I have tested. The engines respond smoothly as well as the surface controls. Taxi and T/O are great. As with all Kings and Queens from Beechcraft, the pilot has to be very careful on landing in order to avoid stalls on short approach in wrong low altitudes. Simply, a perfect model simulation.
I could not yet be able to configure the KA within SPAD Next, just finding a few Saitek buttons to use in this bird. Guess someone will have to make some LUA scripts because this aircraft does not deserve mouse clicks.
Thanx for the well done job.
Regards,
Re: King Air 350i Build 0.0.34
Posted: Tue Sep 24, 2019 5:52 am
by michaelth
Is it possible to save FMS flightplans and load them into the FMS?
Michael
Re: King Air 350i Build 0.0.34
Posted: Tue Sep 24, 2019 5:20 pm
by Turbofandude
Yes, this can be done via the ROUTE LIST menu under one of the INDEX sub-pages. The primary and secondary flight plans can be stored/loaded.
Re: King Air 350i Build 0.0.34
Posted: Wed Sep 25, 2019 3:24 am
by Heronjr
Turbofandude wrote: ↑Tue Sep 24, 2019 5:20 pm
Yes, this can be done via the ROUTE LIST menu under one of the INDEX sub-pages. The primary and secondary flight plans can be stored/loaded.
Hi Collin,
Where should we store/load the plans?
Thanx,