HF beta 1.0.6
-
- Posts: 268
- Joined: Sat Dec 21, 2019 10:02 pm
Re: HF2 beta 1.0.6
Bit sad that the RNAV is still not fixed. It still does not decend after the last altitude constraint.
- doodlebug
- Posts: 1642
- Joined: Sun Feb 19, 2017 2:49 pm
- Location: LYX>YUL
Re: HF2 beta 1.0.6
give us your steps to reproduce please
many problems are location or situation specific
many problems are location or situation specific
-
- Posts: 26
- Joined: Thu Nov 20, 2014 2:08 am
Re: HF2 beta 1.0.6
Finding that calibration thing to be intimidating. Some instruction would be nice
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: HF2 beta 1.0.6
I agree, some calibration instructions would help. With MVAMS open to the throttle calibration, moving the throttle doesn't move the indices; the throttle hardware doesn't work
-
- Posts: 26
- Joined: Thu Nov 20, 2014 2:08 am
Re: HF2 beta 1.0.6
It's doing nothing for me except CTD when trying to calibrate.
-
- Posts: 75
- Joined: Sun Sep 16, 2018 12:35 am
-
- Posts: 26
- Joined: Thu Nov 20, 2014 2:08 am
-
- Posts: 7
- Joined: Mon Aug 12, 2013 1:56 pm
Re: HF2 beta 1.0.6
Does this fix the throttle mapping at all? Specifically, the left engine starting regardless of fuel lever condition?
-
- Posts: 26
- Joined: Thu Nov 20, 2014 2:08 am
Re: HF2 beta 1.0.6
Made some progress. Anyone have a working dual saitek throttle config?
-
- Posts: 47
- Joined: Sat Jun 16, 2012 12:55 am
Re: HF2 beta 1.0.6
This is how I use FSUIPC and I understood is the correct method with this aircraft.FinnJacobsen wrote: ↑Sat Feb 01, 2020 3:38 pmYou can use FSUIPC for all axis' as long as You don´t aplly any calibration to them and preferably set it to Direct "Axis xxxx set". Where xxxx can be Throttle1, Throttle2, Popeller1, Propeller2, Mixture1, Mixture2.
-
- Posts: 268
- Joined: Sat Dec 21, 2019 10:02 pm
-
- Posts: 4
- Joined: Tue Mar 27, 2018 11:15 pm
Re: HF2 beta 1.0.6
Thank you for the update, a good step forward, a lot of improvements, like it so far, but also looking forward to the next versions.
-
- Posts: 7
- Joined: Mon Aug 12, 2013 1:56 pm
Re: HF2 beta 1.0.6
Awesome - just did a quick flight with it. MUCH improved overall!matpietsch wrote: ↑Sat Feb 01, 2020 8:42 pmYes the starting without the lever does not work aynmore. In general a lot of the small bugs have been fixed already.
Bugs: - Stdby Att test/power lights are currently turning blank if the battery is off.
- All the click spots in the center of the rotary knobs (heading sync) etc are missing.
-
- Posts: 268
- Joined: Sat Dec 21, 2019 10:02 pm
Re: HF2 beta 1.0.6
I revise this, RNAV worked well on RNAV Y RWy31 at KSUN. Encouraging update so farmatpietsch wrote: ↑Sat Feb 01, 2020 3:40 pmBit sad that the RNAV is still not fixed. It still does not decend after the last altitude constraint.

-
- Posts: 87
- Joined: Tue Apr 17, 2018 1:03 pm
Re: HF2 beta 1.0.6
Apart from some occasinal issues with the axis', I have been able to do 3 flights with no major issues so far.
Setting up the PL21 has worked great and the flight sequence worked great (Take off, climb with FLC, cruise, VNAV desend and automatic tuning of the ILS and transitioning from LNAV/VNAV to LOC/GS.
One issue though:
I set TA and TL to 5000/FL050. With the barometer setting set to QNH below TA and TL -> set altitude is shown in feet, whereas when barometer is set to STD -> set altitude is shown as FL. So good so far. But when when baro is set to STD and flying above TL I cannot decrease set altitude. Once it comes near FL010 (1000 ft) it changes to 9999 ft and cannot be decrease further.
I guess that set altitude should be indicated in feet below TL (Set on MCDU page VNAV DESC), and FL above TA (Set on MCDU page VNAV CLIMB).
Otherwise HF2 is a big step forward.
Setting up the PL21 has worked great and the flight sequence worked great (Take off, climb with FLC, cruise, VNAV desend and automatic tuning of the ILS and transitioning from LNAV/VNAV to LOC/GS.
One issue though:
I set TA and TL to 5000/FL050. With the barometer setting set to QNH below TA and TL -> set altitude is shown in feet, whereas when barometer is set to STD -> set altitude is shown as FL. So good so far. But when when baro is set to STD and flying above TL I cannot decrease set altitude. Once it comes near FL010 (1000 ft) it changes to 9999 ft and cannot be decrease further.
I guess that set altitude should be indicated in feet below TL (Set on MCDU page VNAV DESC), and FL above TA (Set on MCDU page VNAV CLIMB).
Otherwise HF2 is a big step forward.