crash in P3D V4.1 when switchin target HUD on

[vvince]

Hello,
I have installed the F-4E module, Tackpack extension and ADVanced module install in this order on a complete P3DV4.1 reinstall.
The F4E always crashes to desktop when I try to switch on the HUD target : first I put the switch (left of radar screen) from CL to OPEN, then the mode knob (right of radar screen) to CAGE which inevitably causes a crash to desktop!
It does not matter if I flip other switches before (flaps, TACAN, whatever...) or not.
The modules updated themselves through the MVAMS so I guess I have the latest (v4.1 crash free) version...

Any help would be much appreciated.
Cheers

Vvince

[JonathanBleeker]

Please post the crash report message.

[vvince]

The screen freezes and I get a windows message
"Prepar3D exe has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available"

If you tell me where to look for it, I could send you the crash log report.
Cheers

Vvince

[JonathanBleeker]

Start menu search->Event Viewer->Windows Logs->Application.

[vvince]

OK, here are the messages, 3 of them concern the crash : one has as source "Windows Error Reporting", another one "Application Error" and the third ".NET Runtime"

As I have no idea what it all means, I just append everything below, sorry if it is a bit indigestible...
I also saved a "Report.wer" file that was in the directory indicated below (the only file there actually), tell me if you need it as well.

Thanks for the help,
Cheers

Vvince



"Windows Error Reporting"

Fault bucket 120869202980, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Prepar3D.exe
P2: 4.1.7.22841
P3: 59d67e95
P4: MV_F-4E_Sys.dll
P5: 1.4.0.8
P6: 59e8ec95
P7: c0000005
P8: 000000000000cf52
P9:
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERA886.tmp.dmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERAA1D.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERAA1C.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERAA2C.tmp.txt

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_ead43d8c42c5d9820ac9c28dfc17fdf32b05f_911d388a_2a83c1da

Analysis symbol:
Rechecking for solution: 0
Report Id: a9b980e7-5f06-4b11-bcd8-04ac4ff34cf4
Report Status: 268435456
Hashed bucket: 5c5295759868fe9cedf8c3d0b9977527


"Application Error"

Faulting application name: Prepar3D.exe, version: 4.1.7.22841, time stamp: 0x59d67e95
Faulting module name: MV_F-4E_Sys.dll, version: 1.4.0.8, time stamp: 0x59e8ec95
Exception code: 0xc0000005
Fault offset: 0x000000000000cf52
Faulting process id: 0x2eb4
Faulting application start time: 0x01d35bf3299afc1a
Faulting application path: G:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Faulting module path: G:\Program Files\Lockheed Martin\Prepar3D v4\Gauges\MV_F-4E_Sys.dll
Report Id: a9b980e7-5f06-4b11-bcd8-04ac4ff34cf4
Faulting package full name:
Faulting package-relative application ID:


".NET Runtime"

Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 00007FFD08CECF52

[JonathanBleeker]

Just to verify, it crashes only when you put the knob on CAGE? And you have verified that the engines are running and stable? Just want to make sure that it isn't a co-incident crash while the engines spool up.

[vvince]

yes, only when I put the knob on CAGE (or the positions after CAGE, A/G ...). If I leave the knob alone, no crash and I can fly.
It happens too (the crash) when I switch on CAGE during rolling.
I can do some more testing if you tell me what.

Cheers

[JonathanBleeker]

It happens if you put it on CAGE without moving the other lever from CL to OPEN?

[vvince]

No, it happens when the lever is on OPEN and the knob is moved to CAGE or passed CAGE.
It does not mater if I first move the knob to CAGE or the lever to OPEN : it crashes when both are switched, basically when the target in the HUD should light up. It happens on ground, in flight.

[JonathanBleeker]

Please unzip this into your gauges folder and tell me if you still get the crash.

https://www.dropbox.com/s/37p7b4hm8k0da ... s.zip?dl=0

[vvince]

it still crashes, sorry...

[JonathanBleeker]

No worries. Get the crash report again so I can check if the offset is different. We are now in sync so I can trace it more easily.

[vvince]

here it is.
By the way, when I switch the nuclear weapon switch (I know, one should never play with the nuclear button...), some stuff get automatically activated, and eventually the OPEN lever and CAGE knob, where the sim crashes as when I do it manually.
I remember reading somewhere (but where?) that this nuclear weapon switch is a kind of shortcut. What does it do exactly?
Cheers


"Windows Error Reporting"

Fault bucket 1310308945157961303, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Prepar3D.exe
P2: 4.1.7.22841
P3: 59d67e95
P4: MV_F-4E_Sys.dll
P5: 1.4.0.8
P6: 5a0c195c
P7: c0000005
P8: 000000000000cf72
P9:
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERC6C7.tmp.dmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERC86E.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERC87C.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERC87D.tmp.txt

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_a8c453455e70e217c41eda6cb123adbef07f8bbb_911d388a_1ca5de66

Analysis symbol:
Rechecking for solution: 0
Report Id: 2b70e33a-8792-4f70-9e77-367d7faa41a9
Report Status: 268435456
Hashed bucket: 84cb6cb84e2b2ef6522f270b16283657



"Application Error"

Faulting application name: Prepar3D.exe, version: 4.1.7.22841, time stamp: 0x59d67e95
Faulting module name: MV_F-4E_Sys.dll, version: 1.4.0.8, time stamp: 0x5a0c195c
Exception code: 0xc0000005
Fault offset: 0x000000000000cf72
Faulting process id: 0x1048
Faulting application start time: 0x01d35e48f011664a
Faulting application path: G:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Faulting module path: G:\Program Files\Lockheed Martin\Prepar3D v4\Gauges\MV_F-4E_Sys.dll
Report Id: 2b70e33a-8792-4f70-9e77-367d7faa41a9
Faulting package full name:
Faulting package-relative application ID:


".NET Runtime"
Application: Prepar3D.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 00007FF92F4ECF72

[Krazycolin]

Please, oh please, read the manual. Please

[vvince]

Hello Krazycollin,
I (re-) read the manuals and could not find any infos on the cheat shortcut associated to the nuclear consent switch.
Could you point me out the passage where it is explained please?
I found some mentions to the cheat in Milviz forums though, but it was concerning the F15, not the F4E...
Thanks
Vvince