Post install throttle stuck in reverse
-
- Posts: 4
- Joined: Mon Apr 18, 2022 1:57 pm
Post install throttle stuck in reverse
Hi ,post installation throttle is stuck in reverse ,checked old threads and downloaded dll.xml as per instructions into prepar3d v4/simobjects/airplanes/pc6main/panel and ran it but came back with file already present in main prepar3d folder. Here it is
<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>VRS_TacPack</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Modules\VRS_TacPack\VRS_TacPack.dll</Path>
</Launch.Addon>
</SimBase.Document>
I am using Hotas Warthog controllers and have had no problems with other aircraft in Prepar 3d. could you please assist as having spent the dosh I am getting quite frustrated at not having a working aircraft.
Regards Claw
<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>VRS_TacPack</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Modules\VRS_TacPack\VRS_TacPack.dll</Path>
</Launch.Addon>
</SimBase.Document>
I am using Hotas Warthog controllers and have had no problems with other aircraft in Prepar 3d. could you please assist as having spent the dosh I am getting quite frustrated at not having a working aircraft.
Regards Claw
- Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: Post install throttle stuck in reverse
Have you setup your controls in the MVAMS program?
It looks like XMLTools may not be installed. Can you please download this and run it as an admin. Let me know if there is an error message and do a screenshot of it.
https://milviz.sharepoint.com/:u:/s/Gen ... w?e=5cQOZV
It looks like XMLTools may not be installed. Can you please download this and run it as an admin. Let me know if there is an error message and do a screenshot of it.
https://milviz.sharepoint.com/:u:/s/Gen ... w?e=5cQOZV
-
- Posts: 4
- Joined: Mon Apr 18, 2022 1:57 pm
Re: Post install throttle stuck in reverse
Thanks for getting back to me , I loaded XML Tools and it ran successfully ,however whenever I try to load the aircraft in a scenario it kicks me out of prepar3d - other a/c run normally. ??
Claw
Claw
-
- Posts: 4
- Joined: Mon Apr 18, 2022 1:57 pm
Re: Post install throttle stuck in reverse
The Mvams program has no controls option but I have set up the other options within it.So at the moment after putting XML tools in I do not get as far as loading the P6 into a scenario it just crashes Prepar3d as soon as I select a scenario with P6- any ideas would be welcome.
- Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: Post install throttle stuck in reverse
Which version of P3D are you using? In V5 the WXR module will not work and cause a crash or you may have an old installer. The work around is to make sure you don't have the WXR selected in your panel setup in MVAMS.
-
- Posts: 4
- Joined: Mon Apr 18, 2022 1:57 pm
Re: Post install throttle stuck in reverse
I,m using v4.5 P3d , I have deleted P6 and re-installed and taken out WXR - it now is working - so thanks for your help Steve ,what a kerfuffle just to get a slow old mudmover installed.
Yours gratefully
Claw
Yours gratefully
Claw
- Slayer
- Posts: 1517
- Joined: Sat Mar 08, 2014 3:26 am
- Contact:
Re: Post install throttle stuck in reverse
The WXR will work in v4.5 but there is a patch as I believe the aircraft was released before the final version of V4.5
See this thread for the fix:
http://milviz.com/forum/viewtopic.php?f=211&t=11221