Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Were the installers run as admin? Attempting to verify if they overwrote what they should have.
Also, try going to your FSX-SE install location\Gauges folder, locate the MV_F-4S_Sys and MV_F-4J_Sys.dlls, right click on them, select properties, and verify that there is no Unblock check box. If there is, click it, and then apply.
Do the same on the F4_mod.dlls in your SimObjects\Airplanes\Milviz Phantom II J/S\panel\F4ADV folders
Also, try going to your FSX-SE install location\Gauges folder, locate the MV_F-4S_Sys and MV_F-4J_Sys.dlls, right click on them, select properties, and verify that there is no Unblock check box. If there is, click it, and then apply.
Do the same on the F4_mod.dlls in your SimObjects\Airplanes\Milviz Phantom II J/S\panel\F4ADV folders
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
The installers have little blue and yellow shields on them. Doesn’t that mean they are in admin mode?
I found all of the files you listed and opened “properties”. I didn’t see any “unblock” boxes anywhere in those files. Is there anything in FSX game settings I’m forgetting?
Thank you for your patience JB!
I found all of the files you listed and opened “properties”. I didn’t see any “unblock” boxes anywhere in those files. Is there anything in FSX game settings I’m forgetting?
Thank you for your patience JB!
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
With installers, just right click and run as admin. No need to go to properties. As for anything else, will need to think a bit.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Okay, when I return home this evening if I understand you correctly I should uninstall then reinstall by right clicking the installers.
Thank you JB,
Thank you JB,
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
please also go to your FSX-SE directory and find the sim1.dll, right click on it, select properties->details and give me the version number please.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
I uninstalled and reinstalled as administrator, same results as before.
sim 1.dll
File version 10.0.62615.0
Product version. 10.0.62615.0 (FSX.20150710-1055
Thank you for your help!
sim 1.dll
File version 10.0.62615.0
Product version. 10.0.62615.0 (FSX.20150710-1055
Thank you for your help!
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Ok next: right click on your fsx.exe like you did when you set it to run as admin, but instead of going to properties->Compatibility, go to Properties->Security. Select the Administrators group, and verify that admins have full control, modify, read & execute, read and write, allowed.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Yes, the Administrators group has those boxes checked. Still not starting the F-4.
Thanks,
Thanks,
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
https://www.dropbox.com/s/rgqlynp5bqnsn ... E.zip?dl=0
Try unzipping these into your main sim directory\gauges folder. Once unzipped, do the right click->properties->unblock check.
Try unzipping these into your main sim directory\gauges folder. Once unzipped, do the right click->properties->unblock check.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Great progress!!!
The airplane loads now! It’s not usable yet however. I thought it was stuck in pause but it’s not. The Sound works while it’s loading then shuts off no matter what I try. It says “sound off” on the screen. Pressing Q or the drop dawn Option menu doesn’t fix it. In the cockpit, the throttles are at idle but from the exterior the engines appear to be in full afterburner. From the cockpit, the flight controls don’t move but seem to work on the exterior view.
Thank you!
The airplane loads now! It’s not usable yet however. I thought it was stuck in pause but it’s not. The Sound works while it’s loading then shuts off no matter what I try. It says “sound off” on the screen. Pressing Q or the drop dawn Option menu doesn’t fix it. In the cockpit, the throttles are at idle but from the exterior the engines appear to be in full afterburner. From the cockpit, the flight controls don’t move but seem to work on the exterior view.
Thank you!
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Evidently something is blocking the ADV dlls from loading. Will have something to check shortly.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
I’m getting a strange little error pop-up now when I close FSX that says “Access to Is Denied” with an “OK” button at the bottom. I don’t know what that’s relating to but I see it every time now.
Thanks,
Thanks,
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Something permissions is getting in the way.....Never seen that in my life.
-
- Posts: 43
- Joined: Thu Apr 18, 2019 1:23 am
Re: Milvis F-4 J/S Crashes FSX SE after pushing Fly Now Button
Sorry, I think it’s unrelated to the Milviz Phantom